BJ Spacers and Coils?
#1
BJ Spacers and Coils? 2nd Gen Runner
So I think I am getting closer to what I want. I am going to start with BJ spacers up front. My question is which coils setup out back? Should I go spacer/coil or just coils. I searched and found just to much information. Are the LC coils going to be too much lift out back? They sound awfully tall for the 1.5" BJ spacer up front. I saw some info on 3-4" lift up front with BJ spacers and I am assuming the rest is via the TB adjustment, correct or did I miss something?
TIA ... Lee
TIA ... Lee
Last edited by RLJ3RD; Jun 23, 2005 at 02:18 PM. Reason: Edit of Titile
#3
Probably depends on your vehicle and need. If the existing springs are OK (like you don't bottom out over bumps) then spacers would give you a decent lift to match the ball joint spacers:
http://www.4crawler.com/4x4/ForSale/...tKit.shtml#FAQ
If your rear springs are badly sagging and you need to beef them up, the new coils would work. There are a number of options in varying heights that would work.
http://www.4crawler.com/4x4/ForSale/...tKit.shtml#FAQ
If your rear springs are badly sagging and you need to beef them up, the new coils would work. There are a number of options in varying heights that would work.
#4
Thanks for the info. I would like to bring the rear up some as it does have the usual sag. Any suggestions on coils? Is there an approximate rage in lift the LC coils give. Also how do I order/pay for items from you, is credit card billing accepted?
TIA ... Lee
TIA ... Lee
#5
I'm assuming you're talking about a 2nd gen runner.
If so, check out this thread.
https://www.yotatech.com/forums/f31/cruiser-coil-opinions-needed-pics-61696/
Thats mine with 32s, cruiser coils in the rear and nothing up front...yet
I have bj spacers just haven't thrown them on yet.
If so, check out this thread.
https://www.yotatech.com/forums/f31/cruiser-coil-opinions-needed-pics-61696/
Thats mine with 32s, cruiser coils in the rear and nothing up front...yet
I have bj spacers just haven't thrown them on yet.
#6
Originally Posted by s_wall98
I'm assuming you're talking about a 2nd gen runner.
If so, check out this thread.
https://www.yotatech.com/forums/showthread.php?t=61696
Thats mine with 32s, cruiser coils in the rear and nothing up front...yet
I have bj spacers just haven't thrown them on yet.
If so, check out this thread.
https://www.yotatech.com/forums/showthread.php?t=61696
Thats mine with 32s, cruiser coils in the rear and nothing up front...yet
I have bj spacers just haven't thrown them on yet.
#7
Trending Topics
#8
Wow! I never thought id see somebody from Ridgecrest on here!
Thats where i grew up and lived for almost 20 years.
So hows the heat killin' you? I dont remember seeing very many 4x4 rigs there. Do you have any pics of yours? Sounds like your hooking it up for that hell hole you live in..haha! Man i seriously miss off roading in all that open desert and the Sierra mountains. Sorry for the Hijack but Ridgecrest brings back so many memories.
BTW, welcome to the forum!
Thats where i grew up and lived for almost 20 years.
So hows the heat killin' you? I dont remember seeing very many 4x4 rigs there. Do you have any pics of yours? Sounds like your hooking it up for that hell hole you live in..haha! Man i seriously miss off roading in all that open desert and the Sierra mountains. Sorry for the Hijack but Ridgecrest brings back so many memories.
BTW, welcome to the forum!
#9
Originally Posted by rocket
Wow! I never thought id see somebody from Ridgecrest on here!
Thanks for all the input, it's greatly appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
FS[MidWest]: 1.5" ball joint spacers
4x4YOTA
Axles - Suspensions - Tires - Wheels
2
Aug 23, 2016 09:08 AM
JookUpVandetti
86-95 Trucks & 4Runners
10
Sep 30, 2015 08:58 AM
4runnerFireman
95.5-2004 Tacomas & 96-2002 4Runners
2
Sep 29, 2015 06:24 AM
FS[SouthCent]: TX - 4Crawler Ball Joint spacers
crash813
Axles - Suspensions - Tires - Wheels
0
Sep 27, 2015 07:15 AM





