YotaTech Forums - View Profile: 4Crawler


4Crawler 4Crawler is offline

Contributing Member

About Me


Total Posts
Visitor Messages
Total Likes
General Information
  • Join Date: 06-04-2002


Showing Friends 1 to 10 of 29

Visitor Messages

Showing Visitor Messages 1 to 10 of 69
  1. 4Crawler
    09-14-2017 06:51 AM - permalink
    Sorry, just saw your message spanobain1234. On my '85, this is how I bypassed my A/C low pressure switch:

    Not sure if that's what you are referring to. There's also the A/C idle amplifier, that has an "RPM" knob that sets the low idle cutout RPM and then there's the A/C idle-up Vacuum Switching Valve (VSV) and adjustment knob on the valve cover:

    You need to get those set properly for the A/C to work. You need the cut-out RPM set a bit below the normal idle speed and the idle-up adjustment set to speed the idle up a but when the A/C is on. The idea of these two settings is the low idle cutout stops the A/C if the engine is bogging down at idle, but the idle-up setting makes sure the idle speed jumps up a bit when the A/C is on.
  2. spainobain1234
    07-20-2017 07:22 PM - permalink
    HI 4CRAWLER, I need to find out how to jump my A/C Relay, behind my glove box, or test to see if there is voltage?

    I sometimes hear the idle bounce, fan behind the grill click on and off repeatedly, then the idle drops and bounces again and repeats this process.

    A/c has a mind of its own, it blows hot when idling, and blows cold SOMETIMES when driving at higher RPM.

    I have a 95 4runner 3.SLOW v6.

  3. 11-17-2015 05:42 PM - permalink
    Do you make rear bumper brackets for a 3" body lift on a 93 Toyota 2WD RC?
  4. EFI85
    10-20-2015 09:00 AM - permalink
    Hi 4crawler I need one of those cool headlight harnesses on your website I was wondering if you could help me source one for my 1985 PU ? Thanks
  5. 4Crawler
    11-05-2013 09:25 AM - permalink
  6. 10-24-2013 12:40 PM - permalink
    A/C fast idle - can you please shopw me how it is to be plumbed? I am finishing up my rebuild and I cant figure out how I took it apart. I know, take better pictures in the future!



  7. 4Crawler
    10-05-2013 03:22 PM - permalink
    Marlin's transmission ID page should get you the answer:
    - http://www.marlincrawler.com/transmi...built-complete
  8. banoobee17
    10-03-2013 11:05 AM - permalink
    Could you tell me what tranny this please its for 22re idk if its a g58 w56 etc
  9. 4Crawler
    03-06-2013 07:53 AM - permalink
    Thanks, add the 2nd gen 4Runner link to the headlight page.

    No experience with those injectors, seem like they are OK. I'm still running my original injectors after having them cleaned once about 15 years ago.
  10. banoobee17
    03-05-2013 06:56 AM - permalink
    Here is a good pic that you can possibly use for reference to show ppl that have high beam light issues on 2 gen toyota or earlier i found this when i had this issues when them cause in your write up i noticed my contacts were different

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.