Arizona Arizona Chapter

Arizona Roll Call

Old Apr 6, 2012 | 05:59 PM
  #1581  
punkelberg's Avatar
Registered User
 
Joined: Jun 2009
Posts: 284
Likes: 0
From: Peoria, AZ
Oh, also went back to the Toyota salvage yard on 40th street today...still not open, but spoke with the guys next-door for a bit and got the skinny: If you need parts, call Bob at 602-437-2626 and tell him what you need. He'll check the yard and see if they have it. They're changing the name to "all japanese auto and recycling" www.alljapanesesalvage.com and hope to re-open completely in the next few months.
Reply
Old Apr 7, 2012 | 07:09 AM
  #1582  
glideraz's Avatar
Registered User
 
Joined: Apr 2011
Posts: 163
Likes: 0
From: glendale,az
Sounds like you are having a hell of a time that sucks hope you get it figured out
Reply
Old Apr 7, 2012 | 09:27 AM
  #1583  
bmxjedi's Avatar
Registered User
 
Joined: Jan 2010
Posts: 198
Likes: 0
From: Tempe, Arizona
Originally Posted by punkelberg
I may have to cash in my 401k and do that. Code p1030 came on again yesterday....for the o2 sensor I just replaced. Dumped some fuel injector cleaner in the tank and cleaned the MAF sensor...reset CEL again, we'll see.
Suck some seafoam thru your vacuum, it's much more effective than thru your fuel. Ittl burn out all the crap in your engine and smoke out the neighborhood haha
Reply
Old Apr 9, 2012 | 05:45 PM
  #1584  
andrew1586's Avatar
Registered User
 
Joined: Feb 2012
Posts: 16
Likes: 0
Prescott, as now in my miss the as
Reply
Old Apr 9, 2012 | 06:11 PM
  #1585  
chrisistheshizyo's Avatar
Registered User
 
Joined: Feb 2010
Posts: 9
Likes: 0
From: Tucson, Az
Originally Posted by punkelberg
Oh, also went back to the Toyota salvage yard on 40th street today...still not open, but spoke with the guys next-door for a bit and got the skinny: If you need parts, call Bob at 602-437-2626 and tell him what you need. He'll check the yard and see if they have it. They're changing the name to "all japanese auto and recycling" www.alljapanesesalvage.com and hope to re-open completely in the next few months.
I was hoping to start gathering parts for a conversion later this year.. Might this be a good place to start my search for components?
Reply
Old Apr 10, 2012 | 08:21 AM
  #1586  
punkelberg's Avatar
Registered User
 
Joined: Jun 2009
Posts: 284
Likes: 0
From: Peoria, AZ
Give 'em a call, they have a few full trucks from what I could see.

CEL is back...knock sensor again. Took it to the stealership to have them put it on their Diagnostic CPU. $120 they wanted to charge me for what ended up being nothing more than reading the code through the OBD2.

Spent an hour correcting the service tech on his lack of knowledge about 4runners. ("well, sir...you have 6 injectors...." NO, I have 7 injectors. "the tech had to take apart the dash to access the ECU..." WHY? It's in the passenger-side kick plate "your O2 sensor is hard-wired into the block and the harness exits the rear of the engine" UM, no...it's a split pig-tail connector that exits through the FRONT of the engine...)

Topper was when I got the papers back it said "ODO in XXX275" "ODO out XXX276" problem is, it was still at XXX275. But supposedly they had test drove it for diagnostic...less than a mile? I called BS and had a talk with the Service Manager just to point out that his mechanics weren't doing what they were charging people for. I ended up paying $0 but the principle of the thing pissed me off.

Bitch session over.

Heading to Tip-Top Sunday if anyone want's to join!
Reply
Old Apr 11, 2012 | 06:21 PM
  #1587  
chrisistheshizyo's Avatar
Registered User
 
Joined: Feb 2010
Posts: 9
Likes: 0
From: Tucson, Az
Cool I will.

Also, everyone me and a buddy are gonna try to plan a trip for the 21st of april somewhere around Tucson. Is anyone interested? We're thinking like a day trip and want some company. Also, we're taking input on a location.

Chris

Last edited by chrisistheshizyo; Apr 11, 2012 at 06:45 PM. Reason: Updates
Reply
Old Apr 16, 2012 | 04:31 PM
  #1588  
chrisistheshizyo's Avatar
Registered User
 
Joined: Feb 2010
Posts: 9
Likes: 0
From: Tucson, Az
Is anyone interested in going wheeling somewhere around Tucson this weekend the 21st?
Reply
Old Apr 20, 2012 | 05:51 PM
  #1589  
Mike S.'s Avatar
Registered User
 
Joined: Mar 2011
Posts: 157
Likes: 0
hey guys whats new here? been out for awhile with school and all, any cool trips?
Reply
Old Apr 23, 2012 | 06:41 PM
  #1590  
glideraz's Avatar
Registered User
 
Joined: Apr 2011
Posts: 163
Likes: 0
From: glendale,az
hey there boys and girls i just picked up a e locker from a 08 fj will this work for a locker in the rear of my rig? i know i have to retrofit it in but everyhting else?
Reply
Old Apr 23, 2012 | 07:21 PM
  #1591  
87 Deathtrap's Avatar
Registered User
 
Joined: Apr 2011
Posts: 668
Likes: 0
From: Phoenix, Az
Originally Posted by glideraz
hey there boys and girls i just picked up a e locker from a 08 fj will this work for a locker in the rear of my rig? i know i have to retrofit it in but everyhting else?
Should work. 3linked84 and 85T4runner are both running them front and rear. Perks of being a Toyota tech at recall time I guess.

https://www.yotatech.com/forums/f198...thread-242265/

https://www.yotatech.com/forums/f198...ild-up-239502/
Reply
Old Apr 24, 2012 | 06:39 AM
  #1592  
glideraz's Avatar
Registered User
 
Joined: Apr 2011
Posts: 163
Likes: 0
From: glendale,az
Thanks nate i pm'ed conner to see if he know's if my gears will work or if i have to buy another set,hopefully it's all going to work out cause i got a smokin deal on the diff
Reply
Old Apr 25, 2012 | 11:46 AM
  #1593  
BLKNBLU's Avatar
Registered User
20 Year Member
iTrader: (1)
 
Joined: Mar 2004
Posts: 2,130
Likes: 1
From: Arizona
Everything should swap over just fine. You should just have to deal with the housing modification and wiring issues. Good luck !!
Reply
Old Apr 25, 2012 | 05:14 PM
  #1594  
BLKNBLU's Avatar
Registered User
20 Year Member
iTrader: (1)
 
Joined: Mar 2004
Posts: 2,130
Likes: 1
From: Arizona
On second thought, that is not entirely true as stated above. I think you'll need to re-use or replace the bearings because that 4 cyl diff has smaller thickness bearings. That's too bad, because those bearings are pretty new and they were cryo treated. Try to re-sell 'em. The R&P will still be fine though.
Reply
Old Apr 26, 2012 | 08:46 AM
  #1595  
glideraz's Avatar
Registered User
 
Joined: Apr 2011
Posts: 163
Likes: 0
From: glendale,az
thanks mike, i think the lockrite has seen better days it's starting to go so when i saw this on craigslist i couldn't pass it up 200 bucks how could i go wrong right? the runner is doing great just got ac charged this week and blows nice and cold.

did you get another runner? i see it in you signature
Reply
Old Apr 27, 2012 | 08:36 PM
  #1596  
raven1911's Avatar
Registered User
 
Joined: Apr 2012
Posts: 10
Likes: 0
Hey all, I am new to the 4runner crowd. Just bought a 1999 SR5 3.4L auto and am ready to hit some trails. I live in high country in Prescott. If there are any groups up here hit me up!
Reply
Old May 2, 2012 | 12:55 PM
  #1597  
punkelberg's Avatar
Registered User
 
Joined: Jun 2009
Posts: 284
Likes: 0
From: Peoria, AZ
OK, here's the REAL reason I went with a pre-runner style bumper.....

Reply
Old May 3, 2012 | 04:24 AM
  #1598  
angrybob's Avatar
Registered User
 
Joined: Mar 2010
Posts: 504
Likes: 0
From: Peoria, AZ
Great idea! Water? Where were you?
Reply
Old May 3, 2012 | 07:23 AM
  #1599  
punkelberg's Avatar
Registered User
 
Joined: Jun 2009
Posts: 284
Likes: 0
From: Peoria, AZ
Back side of pleasant like you're going to CK but turn Right on Two Cow then right into the wash until you hit H2o....great spot, lots of shade and good water xings to play in too!

Reply
Old May 3, 2012 | 02:36 PM
  #1600  
punkelberg's Avatar
Registered User
 
Joined: Jun 2009
Posts: 284
Likes: 0
From: Peoria, AZ
Thinking of making a run up to Camp Verde Hot Springs on Sunday if anyone wants to join. Supposed to still be 2 or 3 good water x-ings and some cool trails. Taking both 4runners and my buddies 05 Exploder and meeting some Jeep friends from Cornville on the trail.

http://www.youtube.com/watch?v=Vi54H4gY7_Y
Reply

Thread Tools
Search this Thread

All times are GMT -8. The time now is 04:18 AM.