Sas Vol.2.0
Front:
Sky MFG hanger kit-1" position
44044 springs up front with a leaf removed
Sky boomerang shackles
RS-9000's
TG High-steer
Dirty 30's
5.29s with a Lock-right
Rear:
TG 5" springs with 2 leaves removed
6" shackles
BDS shocks
Manual proportioning valve
5.29's and a spool...
4.7 geared T/Case, TG rear bumper, Slider's, Diff armor
Custom fabbed front bumper...I sure do miss driving the 4runner, should have worn that helmet.. Not much longer

 

2000 Toyota 4Runner SR5
replaced Japanese 3.4L
replaced 5 speed trans
Marlin Crawler Doubler Crawler box
hybrid LC/4Runner/Diamond SFA with Tundra brakes/3-link
Diamond Axle/FROR full floating rear axle kit/e-locker mod/chil-kat cable actuator/4-link
ford gas tank/chopped fuel sending unit/pump assembly
Perkins Performance front bumper/KMA w/Perkins upgrades rear swing out carrier
Smittybuilt XRC-8 Comp winch
1st gen roll bar with carry rack
homebrew sliders based on Addicted Offroad's design
too much other stuff to list.

 

dang thats one beefy front bumper. did you build that yourself?

 

There will be pics, my SAS begins Friday through to Sunday. It's been 10 years of dreaming and figuring, ending in having the funds to do so. I wish me luck. Current specs,ranching 3" lift,Nero 3" rear springs. I am installing a 3" SAS. In anticipation of a droopy aft end I have the 5" shackles, + 6"shackles I made. And some flat leaf springs to add. U bolt flip kit goes aft as well as lower shock mounts. That is all. Over.......

 

fixed dead links

 

trail gear front kit with 3" front springs with leaves added and removed, 5.29 with 38-12.50 TSL, long spline schdl 40 front shaft and schdl 40 rear 4.7 with duals trail gear bumpers and sliders pro comp 4" rear springs with leaves removed and others added,rotated rear housing,and lots of other good stuff. i still got to cut out the rear fenders

 

3 inch Trail Gear SAS front, 3 inch NWOR rear + added leafs and 6 in shackles.
5 days completed.

 

Looks great! What size tires you plan on running?

 

Eventually 35's . And some steel rims, black.

 

Nice rig man. Yeah I think those wheels are killing ur truck bud. What are those center lines?

Why do all these SASed trucks sit high in the front?

 

They are high, but the springs should settle 2 inches or so. What can I say. 35's when I can afford it.

 

Sweet man should look great!

 

Question for guys running 37's and larger. What do you have done to the yota axles to keep from breaking stuff? I see some guys are on tons but I would like to run 37's on Toyota axles (budget minded)

 

i run dirty 30's in front and factory rear with 5.29. there is no need to upgrade rear axles with 22re. i never broke any rears nor has any of my buddies and some of them run 22re with 5.71 and 42's. i have always run 37's with no probs. just got the 38's and have road hard with them and have no issues

 

I run 30 spline longs w/ the hub gears and arp studs on the knuckles. No issues at all.

 

Here is my latest...
TG 3" front/4" rear
37's (with trimming)

 

Nice! I like the bobbed 4door runners!

 

Thats a looker

 

Square F D S..

 

FDS on.........