Bandit Runner's 3rd gen front bumper build
#121
Hello Bandit Runner,
I'm new here on this forum, and not sure how this works.
I bought myself an old 2002 4runner, very rare in Holland, planning to lift it 3" to fit 285/75/16 wheels and an aftermarked front and rear bumper.
When I was looking on the web for bumpers I saw lots of bumpers, nice ones to but non with that nice fit at the fenders.
Than I saw yours, front and rear bumpers, a perfect fit realy nice and your are selling the design!
The question is, how can I get those designs?
I'm new here on this forum, and not sure how this works.
I bought myself an old 2002 4runner, very rare in Holland, planning to lift it 3" to fit 285/75/16 wheels and an aftermarked front and rear bumper.
When I was looking on the web for bumpers I saw lots of bumpers, nice ones to but non with that nice fit at the fenders.
Than I saw yours, front and rear bumpers, a perfect fit realy nice and your are selling the design!
The question is, how can I get those designs?
#122
Registered User
Thread Starter
Guys, I'm selling the designs for this and other bumpers. See this thread:
https://www.yotatech.com/forums/f109...runner-285949/
PM me if you are interested.
Thanks.
https://www.yotatech.com/forums/f109...runner-285949/
PM me if you are interested.
Thanks.
#123
Registered User
Join Date: Nov 2018
Location: Northern NJ
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
#124
Registered User
Hey Bandit, I know this is an old thread but I've seen that you're still active on the forums; just wanted to let you know that your build and write-up were a huge help/inspiration/influence on my current bumper build. Thanks for sharing and nice rig!
Thread
Thread Starter
Forum
Replies
Last Post
gtpman98
95.5-2004 Tacomas & 96-2002 4Runners
9
02-14-2003 06:21 PM
95Runner
95.5-2004 Tacomas & 96-2002 4Runners
7
06-08-2002 01:02 AM