Notices
95.5-2004 Tacomas & 96-2002 4Runners 4th gen pickups and 3rd gen 4Runners

rear hatch ladder

Thread Tools
 
Search this Thread
 
Old 09-03-2008, 08:21 AM
  #21  
Registered User
 
iceman601's Avatar
 
Join Date: Jan 2004
Posts: 234
Likes: 0
Received 1 Like on 1 Post
The top and bottom brackets clamp right over the edge of the rear door...kind of like a c-clamp. The top bracket is one solid piece well the bottom two is separate. Once its fully bolted on, its not going any where. The top bracket easily slides under the OEM spoiler too, and your going to need some good double sided tape or a very thin piece of foam pad for the underside of the top and bottom brackets.

Old 09-03-2008, 04:59 PM
  #22  
Registered User
 
Ron Helmuth's Avatar
 
Join Date: May 2007
Location: Denver metro area-CO
Posts: 2,175
Likes: 0
Received 2 Likes on 2 Posts
thanks iceman601 that helps a bit but you say "once it is fully bolted on" but I see no bolts or screws or fasteners or holes for same.

In reality it is a friction fitment? Yes- I keep looking above to the SURF185 photo-is that your ride ?
Old 09-03-2008, 06:43 PM
  #23  
Registered User
 
iceman601's Avatar
 
Join Date: Jan 2004
Posts: 234
Likes: 0
Received 1 Like on 1 Post
Yup

Here are some closer shots that should clear things up


Upper bracket that is one solid piece


Upper bracket again


Bottom two brackets


nevermind the rusted bolt
Old 09-04-2008, 05:46 AM
  #24  
Registered User
 
Ron Helmuth's Avatar
 
Join Date: May 2007
Location: Denver metro area-CO
Posts: 2,175
Likes: 0
Received 2 Likes on 2 Posts
very cool
thanks for the closeups iceman

now I see the bolts-appreciate that. I am a bit slow.

I like the look of that ladder, and your rig too.
Old 09-25-2008, 05:40 AM
  #25  
Registered User
 
bobs01sr5's Avatar
 
Join Date: Mar 2006
Location: Gilmanton NH
Posts: 181
Likes: 0
Received 0 Likes on 0 Posts
What's wrong with the bumper..that's what I use ?
I looked into one of these which you cannot get anymore but they cost over a thousand bucks when they were available ?
Old 09-25-2008, 08:21 AM
  #26  
Contributing Member
iTrader: (1)
 
Rock Slide's Avatar
 
Join Date: May 2006
Location: B'ham, AL
Posts: 2,262
Likes: 0
Received 1 Like on 1 Post
Originally Posted by bobs01sr5
What's wrong with the bumper..that's what I use?
It's not the bumper, it's him:

Originally Posted by Reverend
Unfortunately, I'm semi-crippled for a few more months until my knee heals up and I have a full range of motion. I can't swing around on the truck like a fully able-bodied person can. For the time being, I need a ladder to get up there.
Old 09-25-2008, 07:51 PM
  #27  
Registered User
 
steanson's Avatar
 
Join Date: Jul 2006
Location: Dallas, TX
Posts: 89
Likes: 0
Received 1 Like on 1 Post
That's what I'm looking for...

And damn the twisted metal look, I think it will look great powdercoated black!
Now, to try to find ANOTHER one on ebay...oh, and thanks Rock Slide for directing me to this thread. I swear I searched here for hours for an answer...but sometimes that's how SEARCH can go.
Can't wait to see final pics, and if you don't like how it looks, shoot me a message!
Old 09-25-2008, 07:59 PM
  #28  
Registered User
 
fillsrunner4's Avatar
 
Join Date: Jun 2004
Location: Woodinville, wa
Posts: 2,906
Likes: 0
Received 2 Likes on 1 Post
Originally Posted by Reverend
Why do you need the latter anyway? isnt that what the running boards and rear step bumper are for???


doesnt look half bad just... Different thats for sure!
Old 09-25-2008, 08:06 PM
  #29  
Registered User
 
steanson's Avatar
 
Join Date: Jul 2006
Location: Dallas, TX
Posts: 89
Likes: 0
Received 1 Like on 1 Post
Originally Posted by fillsrunner4
Why do you need the latter anyway? isnt that what the running boards and rear step bumper are for???


doesnt look half bad just... Different thats for sure!
This is from my parallel universe thread about rear ladders I posted yesterday:

Thanks Rock Slide...I needed that. Now maybe people can just post pics of the different hatch ladders in this thread. A ladder would really be nice when messing with stuff on my rack like surfboards...they tend to be a little unwieldy and delicate, especially longboards in a good breeze. It would also make a great scaffolding for my nephew that thinks he's Spiderman. He's 24. That's a joke, he's only 3. Anyway, someone mentioned they love these things in Costa Rica? Strange...I should look into that...
<==Me trying to use the tire to remove surfboard
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SMOD
86-95 Trucks & 4Runners
2
07-27-2015 01:45 PM
TURBOrunnerNM
86-95 Trucks & 4Runners
4
07-22-2015 11:01 AM
daddio
86-95 Trucks & 4Runners (Build-Up Section)
3
07-18-2015 10:20 AM
icentropy
86-95 Trucks & 4Runners
7
07-14-2015 10:23 AM



Quick Reply: rear hatch ladder



All times are GMT -8. The time now is 03:29 PM.