Play   Pause

New Post
07-23-2019 04:25 AM

i assume you intended to write “valve” or “cylinder head” cover, instead of timing cover? because removing the timing cover isn’t easy, and removing it will not allow observation of the valves to...
(1,679 views, 43 replies)
New Post
07-23-2019 02:53 AM

Thanks! That was the kind of info I needed! After striking out so many times I actually started making my own. Dropped it off at the welder on the way home. ...
(142 views, 2 replies)
New Post
07-22-2019 08:59 PM

LOL on the alignments. Fingers crossed! That's really awesome your Dad could help you with that, plus the quality time you have together!
(8,414 views, 93 replies)
New Post
07-22-2019 06:50 PM

Here is the radiator you want! $164.00 from my local dealership. Been in now about a month and 2000 miles later over ruff roads, some of the miles are from my trip on the WABDR. I did also add the BM...
(4,332 views, 7 replies)
New Post
07-22-2019 06:18 PM

I am gonna focus on getting the truck going before a commit to sawzall the bed up. But I will keep you in mind Yeah, I already have a Lincoln 145HD set up with argon, I just want a TIG machine...
(189 views, 5 replies)
New Post
07-22-2019 06:14 PM

I imagine it is in open loop above 5000 ft. You might be stuck in open loop
(492 views, 12 replies)
New Post
07-22-2019 05:58 PM

Please, any ideas?
(890 views, 1 replies)
New Post
07-22-2019 05:53 PM

Yea thats how i have them. 1-3 however...
(151 views, 4 replies)
New Thread
By: CCDave
07-22-2019 05:14 PM

My 98 Tacoma 4x4 is missing the bracket circled in the photo. It's a vacuum check valve bracket on the brake booster. What's its purpose? I've searched and came up empty. ...
(96 views, 0 replies)
New Post
07-22-2019 04:36 PM

You can post in this engine swap section if you want, or the "Other Makes Cars/Trucks" sub-forum here on YotaTech: For some reason, there is not an "Other...
(4,846 views, 48 replies)
New Post
07-22-2019 04:30 PM

Thanks for the tip! Thank you!!!
(20,856 views, 319 replies)
New Post
By: DMilla
07-22-2019 03:38 PM

Yes, on eBay.
(946 views, 4 replies)
New Post
07-22-2019 01:31 PM

your distributor may be 180 degrees off
(102 views, 1 replies)
New Post
07-22-2019 01:12 PM

I have not talked to the dealership yet, no, but that's a good point, thanks Melrose. I should at least get a price from them if it's available. I tend to ignore them as the local one on my...
(437 views, 16 replies)
New Post
07-22-2019 12:46 PM

Thankfully, no one had hacked the electrical circuitry on my truck. So I replaced the A/C belt, idle up solenoid from 22RE performance and fan blower resistor(had no low) and after adding 1 can of...
(1,081 views, 16 replies)
New Post
By: jlaaj
07-22-2019 12:42 PM

Any progress on the problem? I am experiencing similar troubles. Truck was running great, turned it off for 2 minutes to speak with a border guard and it wouldn't start back up. I left it there...
(1,178 views, 5 replies)
New Post
07-22-2019 12:32 PM

I'm glad to have not worked on a carburetor for, oh, 15 years, but your problem sounds like a leaky float valve, or a sunk float. The bowl over-fills when you run it, and it drains into the carb...
(70 views, 1 replies)
New Post
07-22-2019 10:04 AM

Your question is hard to understand. Basically the long blocks are the same for all 1985-1995 22R's and 22RE's. 1984 and earlier are different.
(4,238 views, 4 replies)
New Post
07-22-2019 08:31 AM

Thanks for the wiring diagram I want to use the powered fuse box for the 1989 toyota pickup The one in the engine bay
(16,218 views, 6 replies)
New Post
07-22-2019 08:20 AM

I took a LEAN course through work last year. I'm fully on board. :safari: I did take a look at the way Cory did it, will probably do close to the same thing. Unfortunately project is on hold...
(9,819 views, 72 replies)

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to and affiliated sites.