rattlewagon's 1992 Pickup Build-Up Thread
#63
Registered User
Thread Starter
These are some old videos of right after the spool went in. I need to get back to the shop. Taking the truck to an off road park in NH end of october and still need to do a few more things. Some of them are sideways, sorry about that, they were from his phone.
http://youtu.be/6bIDKp5HDOs
http://youtu.be/O5QLHqVjV48
http://youtu.be/hbWfjjNiURY
http://youtu.be/V-Aii6UJ0zw
http://youtu.be/6bIDKp5HDOs
http://youtu.be/O5QLHqVjV48
http://youtu.be/hbWfjjNiURY
http://youtu.be/V-Aii6UJ0zw
#67
Registered User
Thread Starter
Theyre not bad typical mud terrain. Im defiantly in the market for a set of swampers if thats what you mean.
Kai- Im going to be in royalton this weekend. Let me know if you go down that way. And I think its time we bob your bed. Haha.
Kai- Im going to be in royalton this weekend. Let me know if you go down that way. And I think its time we bob your bed. Haha.
Last edited by rattlewagon; 01-09-2012 at 03:40 PM.
#68
Registered User
Thread Starter
Had a mouse nest in the fan from last winter. Got that cleaned out.
Finished getting all the nasty carpet out.
Before:
After:
Installed one of these guys because the breather was clogged causing the pinion to leak. Might still need a seal, but well see if it drys up.
Brought my winch with me this weekend to do some more testing. Soloinoids all checked out, but the motor wouldn't spin. So we pulled the motor casing off to find a boat load of corrosion. Nothing looked too worn out, just dirty, so we started taking it apart to clean and re assemble. This thing started life on a trailer, and it looks as it was NEVER covered.
All 4 of the brushes were frozen. Again, dissemble, clean and reassemble.
Got it all back together and it works!! But, still clicks and goes faster spooling out then spooling in. Next Ill take the gear side of it apart and clean and re grease.
And a quick run around the yard before it was time to go.
Sliders should be on Monday. Next on the list is re work the exhaust higher up and still need to mount a fire extinguisher, and I guess that I should probably get some paint on that bob job. Haha.
Finished getting all the nasty carpet out.
Before:
After:
Installed one of these guys because the breather was clogged causing the pinion to leak. Might still need a seal, but well see if it drys up.
Brought my winch with me this weekend to do some more testing. Soloinoids all checked out, but the motor wouldn't spin. So we pulled the motor casing off to find a boat load of corrosion. Nothing looked too worn out, just dirty, so we started taking it apart to clean and re assemble. This thing started life on a trailer, and it looks as it was NEVER covered.
All 4 of the brushes were frozen. Again, dissemble, clean and reassemble.
Got it all back together and it works!! But, still clicks and goes faster spooling out then spooling in. Next Ill take the gear side of it apart and clean and re grease.
And a quick run around the yard before it was time to go.
Sliders should be on Monday. Next on the list is re work the exhaust higher up and still need to mount a fire extinguisher, and I guess that I should probably get some paint on that bob job. Haha.
Last edited by rattlewagon; 09-11-2011 at 03:58 PM.
#71
Registered User
Join Date: Aug 2010
Location: South Royalton, VT
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
Hey, I saw you in Bethel today! Nice work on the interior. Can't wait to see the sliders on, I got some free tubing last week and was planning on making some for my truck. When I get time. LOL
#72
Registered User
Thread Starter
Yeah, all the bridges are out because if Irene, so to get to the interstate (or anywhere really) I have to take back roads to Bethel to get to a main road! Also, I Just put those wipers on today. Haha.
#77
Registered User
iTrader: (5)
Toyo..... which picture? The one with his sliders all wrapped up, or another one? Sorry, I'm a lil slow today! lol. I'm about to bite the bullet on sliders, and I want the right ones... Which I guess are like 4xInnovations and a couple others, right? So, when you said "the plate welded on top"... I think I know what you mean,...and I wanna see that!lol.
#78
Toyo..... which picture? The one with his sliders all wrapped up, or another one? Sorry, I'm a lil slow today! lol. I'm about to bite the bullet on sliders, and I want the right ones... Which I guess are like 4xInnovations and a couple others, right? So, when you said "the plate welded on top"... I think I know what you mean,...and I wanna see that!lol.
#80
Registered User
iTrader: (5)
so far 4xInnovations are the ones i want with the kickout. but i like to look of how it all wrapped up but if the wrap was all metal lol. i would build my own but it seems cheaper to buy 4xInnovations and plate them up. not a fan of tubes. prefer all squares as the runner has more square lines than round