When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Wish I could take the credit for that, but it came from the factory with a fuel door release lever in the truck. Kind of a pain sometimes when I'd go to get gas and forget to open the fuel door.
Pretty sure they all came with both, inside pop and key, mine has both
lol, I've been considering painting the top black to make it a bit more pickupy/less SUVy
Also, bedliner is usually rough, I'd think it would hold dirt
Mine is painted black but with the fiberglass showing through I'm thinking it just gelcoat! There are a couple of bedliner types that can be applied almost smooth, a lumpy surface rather than a rough surface. Some even have the rubber "chips" that you add before mixing the liner.
So without the "texture" I think it would be able to be hosed off OK.
Got the clear turn signals and running lights installed!
See here https://www.yotatech.com/forums/f116/turn-signal-wiring-298786/ for some minor related wiring fun
New O2 sensor
anyone experienced going to tell me the carbon buildup is significant?
Is that "New O² sensor?" As I do I need one, I have one or this is my new one?
They are relatively inexpensive when sourced from the web, if you're concerned it's fouled just go for the replacement.
Mine is a little more crusty on the inside, and very much more muddy on the outside. My concerns for mine is currently the outside air intake could be plugged more so than the sensor surface on the exhaust side. Internally there is a the roidium/zirconia platinum contraption which is much less prone to collect carbon than the shell. Making me running a little richer than it should, but I haven't really driven much since the plugs got cleaned.
.
Is that "New O² sensor?" As I do I need one, I have one or this is my new one?
They are relatively inexpensive when sourced from the web, if you're concerned it's fouled just go for the replacement.
Mine is a little more crusty on the inside, and very much more muddy on the outside. My concerns for mine is currently the outside air intake could be plugged more so than the sensor surface on the exhaust side. Internally there is a the roidium/zirconia platinum contraption which is much less prone to collect carbon than the shell. Making me running a little richer than it should, but I haven't really driven much since the plugs got cleaned.
.
new O2 sensor as in this is the old one, you can see the new one bolted in in the background
Replaced it just cuz I'm at a almost 200k tune up
Just checking to make sure the carbon buildup is nothing to be worried about
Where did you get the clear turn signals and running lights?
ebay, I'll try to post the link when I get home
Turn signals and tail lights are great, running lights are from a second gen, they don't 100% line up with the grille unfortunately, didn't know that would happen
Note that, for some reason, the running lights trim sticks out more than the headlight surrounds. Not sure if a 2wd 87 had a different grille than a 86 4wd, but I would like to find a grille that matches either way
Jan 29, 2017 | 06:28 AM
