I have a 90 4runner 3.0 and i have replaced the starter and cylanoid on the starter and the truck had no problems until today i drove the truck all day start and stop at the stores and then at end of the day it took about 10min. to try to start it. i didn't here any noise outside of the truck no clicking sound like before this happened. So i was woundering if there has been problems for the ignition cylinder or the ignition switch. Please need info.

Thank you Tony

 

did you check to make sure the wires are tight on the starter and battery my battery cable got loose on me and did the same thing

 

i will check the wires 2nite, I talk buddy of mine and he said to check to starter relay.

 

are you sure its your starter? my truck died its the 3.slow and my ignitor went out and it wouldnt start it would just kinda shake a bit then stop

 

I just replaced the starter a month ago. because of this problem, but it was making clicking sound coming from the starter. The truck is starting just fine now so i think it might be maybe the ignition relay or the ignition switch. If it was the ignitor would it still start every so often.

 

nope it wouldnt mine just sat there it worked fine up until it died it will go out slowly my truck acted up for like a week like die and come back everynow and then then one day it wouldnt start

 

battery?

 

battery is good