YotaTech Forums
all cleaned up and polished
all cleaned up and polished
0 2016/01/04 09:27:38
SS fill plug - probably should have put it on the other side so it didn't interfere with the gears (I had to grind it down some on the inside), but I'm relocating the Solenoid pack to under the hood to have more room for my lights so it shouldn't be a problem
SS fill plug - probably should have put it on the other side so it didn't interfere with the gears (I had to grind it down some on the inside), but I'm relocating the Solenoid pack to under the hood to have more room for my lights so it shouldn't be a problem
0 2016/01/04 09:27:43
New Warn 8274 sticker (I Checked with Warn, they don't offer the original Jeep dealer sticker for the 8074, and since I added the freespool clutch....it should be fine, although it's certain to confuse someone down the road that tries to look up the 4 digit serial # without a date code!
New Warn 8274 sticker (I Checked with Warn, they don't offer the original Jeep dealer sticker for the 8074, and since I added the freespool clutch....it should be fine, although it's certain to confuse someone down the road that tries to look up the 4 digit serial # without a date code!
0 2016/01/04 09:27:51
Freespool clutch added and installed
Freespool clutch added and installed
0 2016/01/04 09:27:58
I've heard one of the main points of failure is the break retaining clip popping off under a load, so I chucked it up in the lathe and drilled and tapped a 5/16" bolt into the end and turned off the other part I didn't need
I've heard one of the main points of failure is the break retaining clip popping off under a load, so I chucked it up in the lathe and drilled and tapped a 5/16" bolt into the end and turned off the other part I didn't need
0 2016/01/04 09:28:06
Upgraded 9000 lb 4.5HP motor over the original 2.3 HP Prestolite motor.
Upgraded 9000 lb 4.5HP motor over the original 2.3 HP Prestolite motor.
0 2016/01/04 09:28:15
0 2016/01/04 09:28:28
0 2016/01/04 09:28:38
my late model engine installed.....
my late model engine installed.....
0 2016/01/07 11:08:28
0 2016/01/22 08:12:24
0 2016/01/22 08:12:25
0 2016/02/01 08:43:36
0 2016/02/01 08:43:43
0 2016/02/01 08:43:45
0 2016/02/01 08:43:48
0 2016/02/01 08:43:49
0 2016/02/01 08:43:51
0 2016/02/01 08:43:53
0 2016/02/01 08:43:55
0 2016/02/01 08:43:57
0 2016/02/01 08:43:59
0 2016/02/01 08:44:01
0 2016/02/01 08:44:03
0 2016/02/01 08:44:05
0 2016/02/01 08:44:07
0 2016/02/01 08:44:09
0 2016/02/01 08:44:11
"Pro guide" seals on the left, standard viton style seals on the right.
"Pro guide" seals on the left, standard viton style seals on the right.
0 2016/02/02 07:09:00
"Pro Guide" seal on the left, stock viton seal on the right
"Pro Guide" seal on the left, stock viton seal on the right
0 2016/02/02 07:10:03
Pro guide seal on the left, stock viton style seal on the right
Pro guide seal on the left, stock viton style seal on the right
0 2016/02/02 07:11:31
0 2016/02/08 06:02:43
0 2016/02/08 16:16:06
1st gen 4runner hilux truck toyota custom design plate bumper for warn 8274 winch without cutting the grill Piaa 4" 510 ion fog lights, driving lights, blinkers, and stinger.
1st gen 4runner hilux truck toyota custom design plate bumper for warn 8274 winch without cutting the grill Piaa 4" 510 ion fog lights, driving lights, blinkers, and stinger.
0 2016/02/08 16:16:19
0 2016/02/09 16:31:51
0 2016/02/15 08:14:18
0 2016/02/15 08:15:51
0 2016/02/18 09:43:53
Tabbed and slotted laser-cut plate design so I won't need a jig to fit it together and keep a consistent shape
Tabbed and slotted laser-cut plate design so I won't need a jig to fit it together and keep a consistent shape
0 2016/02/24 15:16:24
working on maximizing sheet layout so I can potentially get the front and rear bumper out of one 4x8 sheet of steel (tabs and slots not shown)
working on maximizing sheet layout so I can potentially get the front and rear bumper out of one 4x8 sheet of steel (tabs and slots not shown)
0 2016/02/24 15:16:25
0 2016/03/27 17:49:05