YotaTech Forums
back work area with new lights installed....much better!
back work area with new lights installed....much better!
0 2018/11/15 06:56:23
back work area with shop lights on before....pretty darn dark
back work area with shop lights on before....pretty darn dark
0 2018/11/15 06:56:21
0 2018/07/09 06:14:42
0 2018/07/02 13:56:09
0 2018/07/02 13:56:06
0 2018/07/02 13:55:37
0 2018/07/02 13:55:17
0 2018/07/02 13:54:51
0 2018/07/02 13:54:25
0 2018/03/31 20:47:29
0 2018/03/31 20:47:23
0 2018/03/31 20:47:09
0 2018/03/31 20:47:01
0 2018/03/31 20:46:53
0 2018/03/31 20:46:35
0 2018/03/31 20:46:28
0 2018/03/31 20:46:22
0 2018/03/08 07:20:45
0 2018/03/08 07:20:39
0 2018/03/08 07:20:32
0 2018/03/08 07:20:25
0 2018/03/08 07:20:19
0 2018/03/08 07:20:15
0 2018/03/08 07:20:09
0 2018/03/08 07:20:05
0 2018/03/08 07:20:00
0 2018/03/08 07:19:53
0 2018/03/08 07:19:47
0 2018/03/08 07:19:42
0 2018/03/08 07:19:41
I think what would look the best would be to cutout the rear valence and have them flush mounted. There's plenty of room back there to do it.
I think what would look the best would be to cutout the rear valence and have them flush mounted. There's plenty of room back there to do it.
0 2018/03/08 07:13:17
Had some extra PIAA backup lights I got off ebay at some point (I have a rough tote full of lights for the 4Runner) and I wanted to wire them up on the truck (wired in with the reverse lights, stand alone on, or off)
Had some extra PIAA backup lights I got off ebay at some point (I have a rough tote full of lights for the 4Runner) and I wanted to wire them up on the truck (wired in with the reverse lights, stand alone on, or off)
0 2018/03/08 07:13:11
Random ebay 2" polished aluminum bends and straights with all the couplers for $60
Random ebay 2" polished aluminum bends and straights with all the couplers for $60
0 2018/03/08 07:13:04
re-mounted the light bar - I hate these things and prefer the old school look of rally lights, but dude spent $700 on this one and it's already wired up. I'll go with PIAA's on my 4Runner
re-mounted the light bar - I hate these things and prefer the old school look of rally lights, but dude spent $700 on this one and it's already wired up. I'll go with PIAA's on my 4Runner
0 2018/03/08 07:12:57
current gas can overflow tank setup that will become a cold air intake
current gas can overflow tank setup that will become a cold air intake
0 2018/03/08 07:12:51
Planning on the intercooler to be completely behind the grille
Planning on the intercooler to be completely behind the grille
0 2018/03/08 07:12:47
had to order a 2.75" to 2" silicone coupler for the intake
had to order a 2.75" to 2" silicone coupler for the intake
0 2018/03/08 07:12:42
original center bar that was cut out
original center bar that was cut out
0 2018/03/08 07:12:38
Got the mesh piece from www.customcargrills.com
Got the mesh piece from www.customcargrills.com
0 2018/03/08 07:12:32
Literally cut out a bunch of the plastic and moved the depth forward and just zip tied the honeycomb mesh in place
Literally cut out a bunch of the plastic and moved the depth forward and just zip tied the honeycomb mesh in place
0 2018/03/08 07:12:25