YotaTech Forums
72 extensions and a dog bone wobble joint knuckle. That's how you get to the two top bolts on the transmission.
72 extensions and a dog bone wobble joint knuckle. That's how you get to the two top bolts on the transmission.
0 2015/08/03 08:40:42
0 2015/08/03 08:45:33
72 extensions and a dog bone wobble knuckle. That's how I get to those two bolts.
72 extensions and a dog bone wobble knuckle. That's how I get to those two bolts.
0 2015/08/03 08:45:35
0 2015/08/03 08:55:38
0 2015/08/03 08:55:41
0 2015/08/03 09:00:09
0 2015/08/03 09:00:12
my shift boot was totally torn to crap, so I replaced it as well. I used a little bit of shoe goo on it when installing so it'll stay in place this time
my shift boot was totally torn to crap, so I replaced it as well. I used a little bit of shoe goo on it when installing so it'll stay in place this time
0 2015/08/03 09:00:16
0 2015/08/03 09:09:34
0 2015/08/03 09:09:38
0 2015/08/03 09:22:14
0 2015/08/03 09:22:18
0 2015/08/03 09:22:21
0 2015/08/06 07:43:43
BTW, the low for that night was 87 here in Texas. 87 and humid.
BTW, the low for that night was 87 here in Texas. 87 and humid.
0 2015/08/06 07:43:54
I'm guessing the 1/4" play in the crank from the front to the back from the loss of the thrust washers also caused this seal in the transmission to go bad.
I'm guessing the 1/4" play in the crank from the front to the back from the loss of the thrust washers also caused this seal in the transmission to go bad.
0 2015/08/10 17:00:34
0 2015/08/10 17:01:56
0 2015/08/10 17:02:40
0 2015/08/10 17:03:51
0 2015/08/10 17:04:00
0 2015/08/10 17:05:36
craftsman gyroscopic ratchet. Not sure of the exact name, but a 1/4" drive and a 3/8" drive came in a package for under $30 on sale.
craftsman gyroscopic ratchet. Not sure of the exact name, but a 1/4" drive and a 3/8" drive came in a package for under $30 on sale.
0 2015/08/10 17:11:49
0 2015/08/10 17:11:58
0 2015/08/10 17:13:52
0 2015/08/10 17:13:59
0 2015/08/17 14:35:42
0 2015/08/17 14:35:45
0 2015/08/17 14:35:48
0 2015/08/17 14:35:50
0 2015/08/17 14:35:53
0 2015/08/17 14:35:56
0 2015/08/17 14:35:58
0 2015/08/17 14:36:50
Both bolts from the fuel line to the cold start injector
Both bolts from the fuel line to the cold start injector
0 2015/08/18 07:34:10
both bolts on either side of the Fuel Filter
both bolts on either side of the Fuel Filter
0 2015/08/18 07:34:13
0 2015/08/19 15:38:20
0 2015/08/24 10:56:50
M14 x 1.5" banjo fitting from Belmetric (Main fuel into fuel rail). I had to grind down one of the tangs that originally held the other fuel line in place
M14 x 1.5" banjo fitting from Belmetric (Main fuel into fuel rail). I had to grind down one of the tangs that originally held the other fuel line in place
0 2015/09/08 08:19:36
M8 x 1.0 Banjo fitting from fuel rail to cold start injector
M8 x 1.0 Banjo fitting from fuel rail to cold start injector
0 2015/09/08 08:19:42
Fuel Pressure gauge mounted on original bracket (later attached to fender) Very easy to read from the front of the vehicle and away from most of the heat you would get closer to the intake
Fuel Pressure gauge mounted on original bracket (later attached to fender) Very easy to read from the front of the vehicle and away from most of the heat you would get closer to the intake
0 2015/09/08 08:19:50