Advice on mounting my CB
#1
Registered User
Thread Starter
Advice on mounting my CB
Okay, so after a year and a half, I'm ready to find a better spot for my CB than the passenger side of the trans tunnel. I have a Cobra Nightwatch. which measures about 7.5"x9"x2.5". I'm having a hard time finding a good spot to mount it. I've got a 92 Xcab manual transmission. Any help is appreciated
#2
Registered User
Join Date: Jan 2007
Location: Chico Republic, NOR*CAL
Posts: 1,987
Likes: 0
Received 0 Likes
on
0 Posts
Okay, so after a year and a half, I'm ready to find a better spot for my CB than the passenger side of the trans tunnel. I have a Cobra Nightwatch. which measures about 7.5"x9"x2.5". I'm having a hard time finding a good spot to mount it. I've got a 92 Xcab manual transmission. Any help is appreciated
found it: https://www.yotatech.com/forums/f116...p-pics-103883/
Last edited by yotasavg; 11-17-2007 at 12:42 PM.
#4
have you tried a little "modding" to stuff it under the radio?, looks doable to my 89, not sure that the interiors changed a whole lot. that's where i had it in my 86
#5
Nix, sounds like the same CB I have, the 29 Nightwatch.
A good place to put it is below the glovebox on 2nd gen 4Runner type interiors, and also that is where I have it now on the FJ.
It does not interfere with the passengers legs at all.
91 4Runner
And in the FJ same spot
The mic now resides on the left side so the cord does not hang out like in the picture.
A good place to put it is below the glovebox on 2nd gen 4Runner type interiors, and also that is where I have it now on the FJ.
It does not interfere with the passengers legs at all.
91 4Runner
And in the FJ same spot
The mic now resides on the left side so the cord does not hang out like in the picture.
#7
Registered User
Thread Starter
I had thought about under the glove box, and still am. Just wondering, though, isn't it a pain to mess with while driving in that location? (BTW, that is the same CB as mine)
Trending Topics
#8
No pain at all.
I do not do any adjustments, as I only run two channels.
Chanel 17 for monitoring traffic when it backs up on my commute, and channel four when we go on runs.
I can also leave the mic up in the upper holder I now have on the dash, as the mic is only a few feet away and I still come through great when people receive me.
I do not do any adjustments, as I only run two channels.
Chanel 17 for monitoring traffic when it backs up on my commute, and channel four when we go on runs.
I can also leave the mic up in the upper holder I now have on the dash, as the mic is only a few feet away and I still come through great when people receive me.
#9
Registered User
Join Date: Mar 2007
Location: Dayton, OH
Posts: 721
Likes: 0
Received 0 Likes
on
0 Posts
https://www.yotatech.com/forums/f116/cb-mount-121231/
I was going to mount mine like corey did in his 2nd gen but got a wild hair and came up with this.
I was going to mount mine like corey did in his 2nd gen but got a wild hair and came up with this.
Thread
Thread Starter
Forum
Replies
Last Post
Pedalpwr27
Prerunner & All 2WD Rigs
0
08-13-2015 06:37 AM
matrad
99+ Tundra, 00+ Sequoia, 98+ Land Cruiser/LX470
2
08-08-2015 03:00 PM
MTLroadierunner
86-95 Trucks & 4Runners
1
07-20-2015 03:07 PM
skoti89
Offroad Tech
3
07-08-2015 12:05 AM