My 93 Pickup with Pics
#1
Registered User
Thread Starter
Join Date: Mar 2005
Location: Cleveland, Ohio
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
My 93 Pickup with Pics
Well, after being on here for several years I have finally figured out and gotten around to posting some pictures of my truck. Here are the list of mods so far done:
Suspension
Sky manufacturing hanger
Marlin 4" springs up front with boomerang shackles
Procomp 9000 shocks
Rear Marlin 5" long travel springs with 2" lift shackles
Procomp 9000 shocks
Drivetrain
3.0 V6 with 266,321 miles
'85 front axle with Sky's truss
Marlin crossover steering
Axle widening kit not spacers
Marlin steering stabalizer
Warn hubs
custom front driveshaft
5.29 with TruTrac front and rear both V6 diffs
custom carrier bearing drop
Other
35 x 12.5 R15 Pro Comp Xterrains
15 x 8 Outlaw II
Modified TJM bumper
Milemarker 9500 winch
Wireless remote for winch
custom exhaust (Magnaflow cat and Flowmaser 40 muffler)
Downey headers
Tacoma center console swap
ARB snorkle
ISR mod
Optima battery
Warn dual beam front lights
EBAY P.O.S. headlights
clear corners
Alteeza tailights with LED backup bulb
Defender roof rack with Hella 500s
Uniden scanner
Kenwood reciever
Kenwood 4" front speakers
Kenwood 6" rear speakers
MTX amp
Infinity reference 12" sub in custom enclosure
Radio Shack CB
Custom built overhead CB console
Bushwacker fender flares
Working on
Rear bumper with tire carrier
On board air
180 amp alternator
dual batteries (2nd one possible main inside of truck)
Planning on doing in the future
High pinion front diff with Toyota E-locker
Either rear detroit of E-locker
Dual transfer case
1 piece rear driveshaft
coilovers up front with 4 link (ORS probably)
Hella headlights
4crawler upgraded harness
3.4 swap, supercharged, and possible automatic conversion(collecting parts as we speak)
sliders and roll cage
mastercraft seats with 5 point harness (placed order today)
Re-paint truck in summer and lower half will be black Linex
and more...
Here are some pictures of my truck,
1
2
3
4
Radio, MP3, Scanner, and open port is for a switch plate
Tacoma Center Console fits perfectly with minor modifications
Overhead console I built for my CB and some switches
So what do you guys think???
Suspension
Sky manufacturing hanger
Marlin 4" springs up front with boomerang shackles
Procomp 9000 shocks
Rear Marlin 5" long travel springs with 2" lift shackles
Procomp 9000 shocks
Drivetrain
3.0 V6 with 266,321 miles
'85 front axle with Sky's truss
Marlin crossover steering
Axle widening kit not spacers
Marlin steering stabalizer
Warn hubs
custom front driveshaft
5.29 with TruTrac front and rear both V6 diffs
custom carrier bearing drop
Other
35 x 12.5 R15 Pro Comp Xterrains
15 x 8 Outlaw II
Modified TJM bumper
Milemarker 9500 winch
Wireless remote for winch
custom exhaust (Magnaflow cat and Flowmaser 40 muffler)
Downey headers
Tacoma center console swap
ARB snorkle
ISR mod
Optima battery
Warn dual beam front lights
EBAY P.O.S. headlights
clear corners
Alteeza tailights with LED backup bulb
Defender roof rack with Hella 500s
Uniden scanner
Kenwood reciever
Kenwood 4" front speakers
Kenwood 6" rear speakers
MTX amp
Infinity reference 12" sub in custom enclosure
Radio Shack CB
Custom built overhead CB console
Bushwacker fender flares
Working on
Rear bumper with tire carrier
On board air
180 amp alternator
dual batteries (2nd one possible main inside of truck)
Planning on doing in the future
High pinion front diff with Toyota E-locker
Either rear detroit of E-locker
Dual transfer case
1 piece rear driveshaft
coilovers up front with 4 link (ORS probably)
Hella headlights
4crawler upgraded harness
3.4 swap, supercharged, and possible automatic conversion(collecting parts as we speak)
sliders and roll cage
mastercraft seats with 5 point harness (placed order today)
Re-paint truck in summer and lower half will be black Linex
and more...
Here are some pictures of my truck,
1
2
3
4
Radio, MP3, Scanner, and open port is for a switch plate
Tacoma Center Console fits perfectly with minor modifications
Overhead console I built for my CB and some switches
So what do you guys think???
#3
Contributing Member
Join Date: Dec 2005
Location: San Antonio, TX
Posts: 1,072
Likes: 0
Received 0 Likes
on
0 Posts
I concur.
Edit: Please tear the rest of that crap off the shifter. There's a nice black plastic piece under it that looks and feels better than having that on.
Edit: Please tear the rest of that crap off the shifter. There's a nice black plastic piece under it that looks and feels better than having that on.
Last edited by 91_4x4runner; 01-11-2007 at 09:14 PM.
Trending Topics
#12
Registered User
Thread Starter
Join Date: Mar 2005
Location: Cleveland, Ohio
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
#13
Registered User
Thread Starter
Join Date: Mar 2005
Location: Cleveland, Ohio
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
I will get some internal pictures for you, but for now the red line is showing how that main piece of aluminum was bent. The four bolts/screws that hold the mirror also hold the front of the console. If you look closely inside the green circle you can see the metal poking out. As for the rear, I took the sunroof off and drilled two holes through the roof and console. Then I bolted that to the truck as well. With the sunroof on, it is weathertight. Like I said I will get some better pictures and a write up this weekend.
oh, and the seats are the stock SR5 seats for 93 - 95 pickups.
Last edited by masterwacker; 01-12-2007 at 03:47 PM. Reason: add more info
#14
Registered User
Thread Starter
Join Date: Mar 2005
Location: Cleveland, Ohio
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
#15
Contributing Member
Join Date: Jan 2004
Location: Whitehorse, Yukon
Posts: 3,587
Likes: 0
Received 0 Likes
on
0 Posts
It feels better after your hand wears down the sharp edges at the top anyways. That was uncomfortable for awhile there.
#16
Sponsor
x2...
see above post about seats. I don't see why the center console wouldn't work in 89 - 95 pickups since the floor is the same in all of them. The front mounts with the stock shifter console. I had to trim a little off of the Tacoma console so the seam lines matched. As for the rear, there are two mounting holes inside the bottom of the console. I just used 2" self taping screws with fender washers and screwed it the to truck. open the picture, then click on the picture , then hit the icon in the lower right that says to open to full size and look at the paintshop circles to see what I am talking about. I will get some more pictures if you want.
#17
Registered User
that is how a truck should be. I like the center console. Sure beats my flimsy dash cupholders.
that reminds me i need to figure out a way to extend my 94's auto shifter. i swear it is made for tiny people.
that reminds me i need to figure out a way to extend my 94's auto shifter. i swear it is made for tiny people.