Just wondering if anyone has custome made a snorkle for the 4runner and if so what is the best method of going about it as well as how to install???

 

they sell a snorkel for the 2nd gen

 

Yes they do.

 

Priceless

 

ARB sells one, Blizzard (member on here - from Spain) made one, but he has a diesel (bastard!)

 

I'm in the middle of making mine for my 95 pickup with a 3.0. Basically its going to be a stock sealed airbox with a 3" hole cut in the side. I'm going to silicon a 3" flex line into the whole which will go through the fender and hookup to a 3" wide ABS 90* knuckle connected to a 2" section. It will be topped with an ARB safari head. I'll post pictures when i'm done.

 

Be sure to post pix - I have NO IDEA how you're gonna fit that in there...

 

Did you see the custom one on this Surf?

https://www.yotatech.com/forums/f100/toolangi-murrindindi-105342/

 

Wow, that snorkel is... Huge!

I made mine with 70mm stainless steel pipe and with a 50? bend.





Altought you don't understant Spanish you can see the pics of my process

http://www.4runnerforo.com/phpBB2es/...p?t=66&start=0

David

 

My best guess is that 3" flex pipe will ovel out under the pressure of the fender. If not I'll run 2, 2in or 1.5in where I can get them by and run both back into the airbox.