I was wondering what the third members of this T-100 I am parting out would fit. They are 4.30 and its a 1995 V-6 Auto Ext Cab. (A11A code). wondering if they fit tacomas 4runners and what years? Thanks Guys.

 

Anyone Anyone?

 

Bump...anyone know if these fit the 2nd gen or 3rd gen 4runners or tacomas?

 

I know the front third is the same for all ifs trucks, the t100 just uses longer axles, but the rest of the front suspension on a t100 will fit all ifs trucks, the rear third looks to fit T100 and tacoma v6 rearends, not positive on the rear, very sure on the front.

 

See here:
http://home.4x4wire.com/erik/diffs/#T100-Tundra

Front diff will fit no problem, rear diff may work. It will not fit the older the pre 95 trucks and will not fit 4runners.

 

Here is some good diff info: http://home.4x4wire.com/erik/diffs/

oops... looks like CJM beat me to it.

If I understand correctly, the T100 diff will fit the non-TRD (non e-locker) Taco.

 

nope. wont fit. the T100's use the standard rotation PS front diff.

...from erik's diff page.

 

Oy, I missed that part..I think I need to go to bed..

 

Thanks Guys. I knew someone had to know.