TJM T13 Installed
#1
Registered User
Thread Starter
Join Date: Jul 2003
Location: Cheyenne, Wyoming
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
TJM T13 Installed
Finsihed the installation of my TJM T13. Came out really nice. I did have to modify my grill where the push bar meets it. Otherwise fits well. With the winch, it dropped my front about half an inch.
Trending Topics
#11
Registered User
iTrader: (1)
Nice work! Yours is built exactly how I want my 2000 5-speed, right down to the Sequoia wheels and bumpers.
BTW, how much grinding did you have to do on the A-arms to accomodate the wheels? In other words, if I wanted to run spacers, how thick would they have to be?
Ken
P.S. We want more pics.
BTW, how much grinding did you have to do on the A-arms to accomodate the wheels? In other words, if I wanted to run spacers, how thick would they have to be?
Ken
P.S. We want more pics.
#12
Registered User
Thread Starter
Join Date: Jul 2003
Location: Cheyenne, Wyoming
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
Thanks everyone. I like it. Looking for a spanner wrench to lift the front up a little more.
I do like the kings. Nice ride! Doesn't flex much at all, but it is IFS.
I had to cut about .5 to .75 of an inch off the upper a-arm to fit the Sequoia wheels with 285's. You would need, at least, a half inch to an inch spacer. The offset of the Sequoia wheel is 5".
I do like the kings. Nice ride! Doesn't flex much at all, but it is IFS.
I had to cut about .5 to .75 of an inch off the upper a-arm to fit the Sequoia wheels with 285's. You would need, at least, a half inch to an inch spacer. The offset of the Sequoia wheel is 5".
Thread
Thread Starter
Forum
Replies
Last Post
punks_is_4x4
86-95 Trucks & 4Runners
10
08-21-2015 01:35 PM
Esibnitsud
86-95 Trucks & 4Runners
0
07-30-2015 08:19 PM
Vargntucson
95.5-2004 Tacomas & 96-2002 4Runners
0
07-04-2015 12:15 PM