S/C tranny saver...
:pat:
Jul 26, 2003 | 12:13 PM
#45
Thread Starter
Registered User
Joined: Dec 2002
Posts: 4,697
Likes: 0
From: Deep Gap, NC
They may but I don't know where it would be. That's why I mentioned checking in a service manual to see if they've got an easy adjustment for the fluid pressure solenoid on the newer trucks.
Chris
Chris
Jul 26, 2003 | 01:19 PM
#46
Registered User
Joined: Oct 2002
Posts: 524
Likes: 0
From: Towson, MD
Originally posted by AUJWE
Well, to be honest, I kind of stumbled across this mod about 1 1/2 - 2 years ago when I installed my K&N FIPK and Power Toilet(as someone called it) spacer on my 2000. I adjusted that shift cable and definitely noticed the firmer shifts. It's been shifting firm for about 20,000 miles with no problems. But, I don't have it adjusted all the way as someone mentioned. Probably only about half that much. I like the way it shifts but was concerned that it was hurting something. I guess this whole thread tells me that it is ok. I know that most of you probably won't believe me, but you can ask FattyCBR becasue I had PM'd him about this over on ODW before this board even existed. I had asked him about the cables and about the tranny shifting firmer. Well, good luck with the mod.
Well, to be honest, I kind of stumbled across this mod about 1 1/2 - 2 years ago when I installed my K&N FIPK and Power Toilet(as someone called it) spacer on my 2000. I adjusted that shift cable and definitely noticed the firmer shifts. It's been shifting firm for about 20,000 miles with no problems. But, I don't have it adjusted all the way as someone mentioned. Probably only about half that much. I like the way it shifts but was concerned that it was hurting something. I guess this whole thread tells me that it is ok. I know that most of you probably won't believe me, but you can ask FattyCBR becasue I had PM'd him about this over on ODW before this board even existed. I had asked him about the cables and about the tranny shifting firmer. Well, good luck with the mod.
Haha I remember that Joey, I think I still have that PM actually. I'm glad to hear that your tranny is still holding up after 20k, somehow I find it hard to believe that there is no down side to this mod.
Thread
Thread Starter
Forum
Replies
Last Post
TheBFA
Solid Axle Swaps, All Years
8
Feb 15, 2020 06:55 AM
live4soccer7
84-85 Trucks & 4Runners
3
May 11, 2016 06:52 PM
hiluxinargentina
86-95 Trucks & 4Runners
3
Sep 30, 2015 05:51 PM
