86-95 Trucks & 4Runners (Build-Up Section) Post your build-ups here

ChefYota4x4's 1987 4Runner Build-Up Thread

Thread Tools
 
Search this Thread
 
Old Nov 25, 2013 | 08:55 AM
  #8081  
bbrideau's Avatar
Registered User
 
Joined: Aug 2011
Posts: 590
Likes: 0
From: Fernie, British Columbia, Canada
Originally Posted by ChefYota4x4
Thermoshield is available at Pep Boys for I believe $40 for a 4 by 6 slab. Maybe its 8 feet... I can't remember. Either way, compared to other products after reading the specs, I was very impressed with the price and the fact that I could pick it up down the street in the store rather than wait for it to be delivered. My entire cargo area is covered on the floor with frost King foil backed closed cell foam self-adhesive padding: and thermoshield... It's absolutely incredible on keeping the noise down and equally or more important at some times, keeping the cold off my back when I camp back there. I also have the panels insulated with sound deadening and frost King... That was equally as helpful with sound and climate control... At Pismo, recently, it got pretty cold at night and I was so warm I couldn't even keep my sleeping bag on... The only thing left to do is the doors up front and the back door. I have to ground the rear window switch and roll up the window so I can get some sound deadening and frost King in there as well. I love it, to answer your question in three words!
Thanks gonna have to use that in not only my runner but the Tracker as well as it is -20 celsius here and neither truck holds in heat very well.
Reply
Old Nov 25, 2013 | 09:03 AM
  #8082  
ChefYota4x4's Avatar
Thread Starter
Registered User
iTrader: (5)
 
Joined: Jun 2009
Posts: 19,281
Likes: 20
From: Lake Havasu, AZ
Thanks, Paul!

You're welcome, Brandon,.....

And once again, RAD4runner is my RADhero! LOL... HAHA. .... But seriously, thanks a lot man!

PS: The Thermoshield stuff does work great by the way, right? I love the frost King as well! U-seal rocks too! Never had a single wiff of it all summer and it works like a charm and is very very adhesivy! Lol...

Last edited by ChefYota4x4; Nov 25, 2013 at 07:28 PM.
Reply
Old Nov 25, 2013 | 06:16 PM
  #8083  
BeardedFish's Avatar
Registered User
 
Joined: Nov 2013
Posts: 56
Likes: 0
From: Michigan
I'm only 10 pages in Chef and all I can say is wow! Nice Work! I hope mine will be this nice someday
Reply
Old Nov 25, 2013 | 07:28 PM
  #8084  
ChefYota4x4's Avatar
Thread Starter
Registered User
iTrader: (5)
 
Joined: Jun 2009
Posts: 19,281
Likes: 20
From: Lake Havasu, AZ
Originally Posted by BeardedFish
I'm only 10 pages in Chef and all I can say is wow! Nice Work! I hope mine will be this nice someday
Thanks Much, man! Glad u came by!
Reply
Old Nov 26, 2013 | 07:31 AM
  #8085  
BeardedFish's Avatar
Registered User
 
Joined: Nov 2013
Posts: 56
Likes: 0
From: Michigan
Originally Posted by ChefYota4x4
Thanks Much, man! Glad u came by!
You're very welcome, I'm glad too!
Reply
Old Nov 26, 2013 | 07:59 AM
  #8086  
Redeth005's Avatar
Registered User
 
Joined: Apr 2012
Posts: 2,817
Likes: 2
From: Los Angeles CA
Originally Posted by BeardedFish
I'm only 10 pages in Chef and all I can say is wow! Nice Work! I hope mine will be this nice someday
Very few have made it through reading through the entire Chefyota4x4 build thread. It's a rigorous challenge of many pages to read. Should you be able to read through it all you would have done the near impossible. Lol good luck sir I tip my hat to you bahahaha.

Jk but in all reality I couldn't finish the whole thread lol. I do have to say he has a bunch of helpful information on the thread though. Do us all a favor and grab a pen and paper and note down what projects were done on what pages so we could eventually (when u finish) have an index to this huge book. Lol
Reply
Old Nov 26, 2013 | 10:58 PM
  #8087  
JonnyBoy's Avatar
Registered User
 
Joined: Apr 2007
Posts: 1,580
Likes: 1
From: Park City, UT
He'll never be finished Richard...but he sure as heck should slow down! He's making the rest of us(well, not really you Richard) look lazy.
Reply
Old Nov 27, 2013 | 04:47 AM
  #8088  
BeardedFish's Avatar
Registered User
 
Joined: Nov 2013
Posts: 56
Likes: 0
From: Michigan
Originally Posted by Redeth005
Very few have made it through reading through the entire Chefyota4x4 build thread. It's a rigorous challenge of many pages to read. Should you be able to read through it all you would have done the near impossible. Lol good luck sir I tip my hat to you bahahaha.

Jk but in all reality I couldn't finish the whole thread lol. I do have to say he has a bunch of helpful information on the thread though. Do us all a favor and grab a pen and paper and note down what projects were done on what pages so we could eventually (when u finish) have an index to this huge book. Lol
lol well at least I've got all winter to chip away at it. thanks, I'm gonna need it.

If I were to catalog it I don't think I'd ever have time to work on my own rig, I'd spend the rest of my days organizing the info haha
Reply
Old Nov 27, 2013 | 04:56 AM
  #8089  
Redeth005's Avatar
Registered User
 
Joined: Apr 2012
Posts: 2,817
Likes: 2
From: Los Angeles CA
Originally Posted by JonnyBoy
He'll never be finished Richard...but he sure as heck should slow down! He's making the rest of us(well, not really you Richard) look lazy.
I won't lie, I only read up to about pg150 then began to just browse stopping whenever id see pix haha

Originally Posted by BeardedFish

lol well at least I've got all winter to chip away at it. thanks, I'm gonna need it.

If I were to catalog it I don't think I'd ever have time to work on my own rig, I'd spend the rest of my days organizing the info haha
Ha you'll spend an eternity reading through the thread too lol! Jk there's some good stuff in the thread. Its just hard to find.
Reply
Old Nov 27, 2013 | 08:14 AM
  #8090  
RAD4Runner's Avatar
Registered User
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Mar 2012
Posts: 7,125
Likes: 681
Hey Mark, Grego, Richard, and other So Cal Yota guys,
Let's have a get together between Christmas and New Year. If you can find schematic for
your trailer connector, we can test it by then
-Ray
Reply
Old Nov 27, 2013 | 08:33 AM
  #8091  
Redeth005's Avatar
Registered User
 
Joined: Apr 2012
Posts: 2,817
Likes: 2
From: Los Angeles CA
Originally Posted by RAD4Runner
Hey Mark, Grego, Richard, and other So Cal Yota guys,
Let's have a get together between Christmas and New Year. If you can find schematic for
your trailer connector, we can test it by then
-Ray
And do a killswitch for my truck??? Yes??? Please lol.

I'm sure my buddy with the stock 86 toyota pu would enjoy a trip.
Reply
Old Nov 27, 2013 | 08:34 AM
  #8092  
ChefYota4x4's Avatar
Thread Starter
Registered User
iTrader: (5)
 
Joined: Jun 2009
Posts: 19,281
Likes: 20
From: Lake Havasu, AZ
Jeeeesh! I'm sooooooo sorrrrry! Hahahahaha.... Jk.... It is what it is. I just spend around 20 min a day and catch up with everyone.... Read every page of yours' since you started, Richard, Ray, Jonny, Terry, Dragon, Grego, Jerry, Brandon (xxx and GWNortherner, lol), Jason, Andrew, Mike, N8, ....etc, etc, etc...( I don't know was understand it but I read it! Lol.) ....But it's ok, .....I understand........ Hahahahhaha.... Just messin. It's alot to read, and I would do a summary, along with joining my 25 or so other threads, totalling around 650 pages all together... But I'm too busy and I spend this spare time on here, usually, helping others, either in PM's or in their threads.... So unfortunately, it's gonna have to stay a mess.

Terry makes me feel like that, Jonny! Hahaha...

And, obviously I understand how daunting it is to get through my thread,...... otherwise I would have done it to make that glossary already! Hehehehehehe!

RAD, aka "Mr. D in the place to be!", lol....

How about the M.O.R.E./ Holiday 200???...

http://www.moreracing.net/

Or, we could romp around the Angeles Crest, that way we can all wheel, some of us extreme and down to as mild as you want for Grego and you, etc.? ? ? Orrrr, just hangout at my pad and talk shop/eat/knock out some lingering gremlins? haha
Reply
Old Nov 27, 2013 | 10:03 AM
  #8093  
RAD4Runner's Avatar
Registered User
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Mar 2012
Posts: 7,125
Likes: 681
Originally Posted by Redeth005
And do a killswitch for my truck??? Yes??? Please lol.
Surely, Richard! We'll need schematic for your V6, and all present would be suspect IF your truck ever gets stolen 'cause we know where the kill switch (or switcheS) would be LOL!

Originally Posted by ChefYota4x4
RAD, aka "Mr. D in the place to be!", lol....
How about the M.O.R.E./ Holiday 200???...
hangout at my pad and talk shop/eat/knock out some lingering gremlins? haha
Probably just hang, hunt for gremlins and eat. Got recipe for gremlin stew, Mark? LOL!
Reply
Old Nov 27, 2013 | 11:57 PM
  #8094  
JonnyBoy's Avatar
Registered User
 
Joined: Apr 2007
Posts: 1,580
Likes: 1
From: Park City, UT
I think I'm down for the MORE race, or Angeles crest, or hangout, but probably only 1 of the three is multiple events end up happening. I'll have to spend some quality time with my Subie engine sometime soon.
Reply
Old Nov 28, 2013 | 09:18 AM
  #8095  
Redeth005's Avatar
Registered User
 
Joined: Apr 2012
Posts: 2,817
Likes: 2
From: Los Angeles CA
Happy Birthday Mark.
Hope you're having a great time in Lake Havasu with your pops and family. I can see you're gonna have a great thanksgiving with some really good food out there based from the instagram videos you've been posting up. Have fun out there dude. Be safe. And most of all get your grub on!

Btw my buddy Julio with the stock pick up(bought ur sr5 wheels & bfg ATs) said he is up for an Angels Crest trip. I think we outta set a date so we can all meet up there for the day.

Last edited by Redeth005; Nov 28, 2013 at 09:23 AM.
Reply
Old Nov 28, 2013 | 09:20 AM
  #8096  
bbrideau's Avatar
Registered User
 
Joined: Aug 2011
Posts: 590
Likes: 0
From: Fernie, British Columbia, Canada
Happy birthday! And thanksgiving!
Reply
Old Nov 28, 2013 | 10:27 AM
  #8097  
diableri's Avatar
Registered User
 
Joined: Feb 2013
Posts: 121
Likes: 0
From: Central CA
Happy Birthday Chef and many gobbles to all today!
Reply
Old Nov 28, 2013 | 01:03 PM
  #8098  
Cyberhorn The Dragon's Avatar
Registered User
 
Joined: Jul 2012
Posts: 2,365
Likes: 4
From: Idaho
happy birthing day mark
Reply
Old Nov 28, 2013 | 06:20 PM
  #8099  
JonnyBoy's Avatar
Registered User
 
Joined: Apr 2007
Posts: 1,580
Likes: 1
From: Park City, UT
Well happy birthday and happy thanksgiving from one Jonny that's 1.5 sheets to the wind(working on the other 1.5) up in Big Bear!
Reply
Old Nov 29, 2013 | 12:25 AM
  #8100  
Terrys87's Avatar
Super Moderator
iTrader: (1)
 
Joined: Aug 2008
Posts: 11,787
Likes: 28
From: Anderson Missouri
Happy Birthday and Thanksgiving. Someday,month,year, I would like to go thru your thread and put all your upgrades into one post. You have a lot of them. Enjoy your time with the family.
Reply



All times are GMT -8. The time now is 09:46 PM.