Chevy Auto Tranny with 350 in 94 4Runner
Jul 2, 2010 | 10:21 PM
#1
Thread Starter
Registered User
Joined: Jul 2010
Posts: 2
Likes: 0
Chevy Auto Tranny with 350 in 94 4Runner
Hello All,
I'm new to the forum, and I have been working on a new project.
I have a 94 4Runner that I would like to install a Chevy 350 and a turbo 350 transmission. I am looking for advice and guidance in mounting needs for the transmission, and to investigate the transfer case possibilities. I am still running IFS, but a SAS is in the future for the rig.
I'm new to the forum, and I have been working on a new project.
I have a 94 4Runner that I would like to install a Chevy 350 and a turbo 350 transmission. I am looking for advice and guidance in mounting needs for the transmission, and to investigate the transfer case possibilities. I am still running IFS, but a SAS is in the future for the rig.
Jul 2, 2010 | 10:49 PM
#2
Joined: Jan 2003
Posts: 17,692
Likes: 58
From: Marysville, WA
Jul 2, 2010 | 11:00 PM
#3
Thread Starter
Registered User
Joined: Jul 2010
Posts: 2
Likes: 0
Thanks for the directions, and I had searched for some time. I haven't found any particulars with installing the auto trans. In regards to mounting bracket fabrication or spacing. Most posts seem focused on retaining the Toyota transmission. I have gone through the links you forwarded, and still have some question in regards to transmission accommodation. There would also be a question as far as mounting point for a secondary transmission cooler.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
Jun 1, 2021 01:51 PM
madxman21
86-95 Trucks & 4Runners
2
Jul 9, 2015 10:26 AM
Jnkml
95.5-2004 Tacomas & 96-2002 4Runners
3
Jul 6, 2015 01:20 PM
