Chevy Auto Tranny with 350 in 94 4Runner
07-02-2010, 10:21 PM
#1
Registered User
Thread Starter
Join Date: Jul 2010
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Chevy Auto Tranny with 350 in 94 4Runner
Hello All,
I'm new to the forum, and I have been working on a new project.
I have a 94 4Runner that I would like to install a Chevy 350 and a turbo 350 transmission. I am looking for advice and guidance in mounting needs for the transmission, and to investigate the transfer case possibilities. I am still running IFS, but a SAS is in the future for the rig.
I'm new to the forum, and I have been working on a new project.
I have a 94 4Runner that I would like to install a Chevy 350 and a turbo 350 transmission. I am looking for advice and guidance in mounting needs for the transmission, and to investigate the transfer case possibilities. I am still running IFS, but a SAS is in the future for the rig.
07-02-2010, 11:00 PM
#3
Registered User
Thread Starter
Join Date: Jul 2010
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the directions, and I had searched for some time. I haven't found any particulars with installing the auto trans. In regards to mounting bracket fabrication or spacing. Most posts seem focused on retaining the Toyota transmission. I have gone through the links you forwarded, and still have some question in regards to transmission accommodation. There would also be a question as far as mounting point for a secondary transmission cooler.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
madxman21
86-95 Trucks & 4Runners
2
07-09-2015 10:26 AM
Jnkml
95.5-2004 Tacomas & 96-2002 4Runners
3
07-06-2015 01:20 PM
