HELP! pro comp lift on my 1991 runner
#1
Registered User
Thread Starter
HELP! pro comp lift on my 1991 runner
Im working on building my first 4runner. i bought a pro comp 4" ifs lift from a friend but i still need some parts for it- both rear a-arm drop brackets and the rear crossmember. Anyone know where i can get these? ive worn myself out looking online but i cant find the individual parts... and also i need advice for lifting the rear ( the kit was for a tacoma so it had the blocks instead of coils) Any help????!!!!
#3
Registered User
Thread Starter
well i thought about that and i did my research so i wouldnt shoot myself in the foot... all the part numbers are the same for 1986-1995 tacoma & 4runners for the IFS in the front. the installation instructions also cover 2nd gen runners it just says you need a different rear kit...
#5
Contributing Member
iTrader: (3)
well i thought about that and i did my research so i wouldnt shoot myself in the foot... all the part numbers are the same for 1986-1995 tacoma & 4runners for the IFS in the front. the installation instructions also cover 2nd gen runners it just says you need a different rear kit...
Have you contacted the person you bought the kit from? Sounds like they left out a few critical parts.
#6
Registered User
Join Date: Dec 2006
Location: Wilkes Barre Pa.
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
lift help
go on explorerprocomp.com click on dealers and tell them you need part #90-1296 (ask if you can only get 2 of them you dont need 4)and part # 90-1290
#7
Registered User
Thread Starter
so i got ahold of 4wheel parts in sac and they can get me the parts i need to finish the front. ordering them this weekend... what about lifting the rear?? any suggestions?
Trending Topics
#8
Registered User
Join Date: Feb 2010
Location: N. Lake Tahoe/Chico CA
Posts: 1,934
Received 0 Likes
on
0 Posts
well you can always do the poor mans lift- blocks. or you can get longer leafsprings. your choice
Last edited by 87hillbillyoter; 06-16-2010 at 11:24 PM.
#12
Please help
Hey what's up new to the forum and I'm installing the pro comp 4 inch stage 2 lift on my 93 4 runner and need help do, do I use the front cross member in the same location or move it down?
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
MMA_Alex
86-95 Trucks & 4Runners (Build-Up Section)
25
04-18-2017 05:07 AM
Jnkml
95.5-2004 Tacomas & 96-2002 4Runners
3
07-06-2015 01:20 PM
Vargntucson
95.5-2004 Tacomas & 96-2002 4Runners
0
07-04-2015 12:15 PM