I did a search back to 2006 and only found one topic that specifically mentions this (search glove box shifting) from '07, and that doesn't have what I'm looking for (though there are promises made to the effect that people will go out and scan theirs etc).

I called 2 dealers (Santa Monica and Northridge) and they couldn't find a p/n (and the parts guy @ SM for the record was a complete d-bag about it, told me I was wasting his time etc).

I'm wondering if anyone has a good, clear picture or scan of this sticker so I can repro it, or if maybe someone has one New Old Stock or something or knows where to get it? I have the visor one in my '89 4Runner, but miss the old-school look of my '86's glove box door.

In the FWIW dept, there is a glove box door in my interior color (maroon / burgandy / red whatever) on ebay that has the sticker on it, but my glove box door works fine and I really don't want to replace it just to get a sticker.

Thanks

 

This one?

 

I have a fairly intact sticker on a spare glove box door if interested in a real one. E-mail me if interested.

 

I have a blue glove box with the sticker on it I can take it and the box out of the v6 and scan them at a buddy's and post them up for you give me a few days.

 

Hey all, thanks for all of the responses! The one with the picture works fantastic. I'm going to see what it looks like printed out on some glossy sticky-back paper.

No need to disassemble, thanks again everyone!!

 

Hi Everybody - I know its an old thread but I need a shifter decal too...anybody know the part number?

I have 88 v6.....it seems that 88 one decals are bigger than prior years....

thank you

email

decalimport@gmail.com

 

anybody..willing to assist thank you

 

I made engine fuse box decal already.

 

For what its worth, not all of the decals were the same. They were different if the truck has manual or automatic hubs.

~T.J.

 

T.J. - you are right. How do i know, I learned it the hard way. good luck!

 

The EPC shows only one listed for an 88 PU/4Runner w/3VZ-E, PNC 74533(part # 36369-35070). To the best of my knowledge no 88 PU or 4Runner w/3VZ-E came with automatic locking hubs(or an automatic transmission).
https://www.1sttoyotaparts.com/part_number_search.html

The EPC also shows that the PNCs for automatic locking hubs are not applicable to an 88 PU/4Runner w/3VZ-E(same goes for the automatic transmission PNCs, N/A). I can prove that if necessary.

 

I have one scanned for a 1985. Think
it's still in Toyota wrapper with pn. PM if you need further assistance.
The decals do vary as other posters previously explained.