Any one have good photos of the two fuse boxes on the 86 Toyota 4x4 truck w/the 2.4 EFI?

 

What are you looking for, or trying to do ?.

 

http://www.4crawler.com/4x4/CheapTri...CheckConnector

 

Here is some '85 fuse box info:
http://www.4crawler.com/4x4/4R_TechI...tml#Electrical

 

Myyota,no power at dome light switch..fuse good.Cleaned door plungers and switch housing.Not grounded somewhere? Where abouts would the ground be.Trouble is I'm not mechanical and my hands are shot from pinched elbow nerves.

 

check your connections...24 year old truck, thinks come loose

 

My 86 had the same prob. It was the switch and connections in the dome its self. I had to push things around etc and blamo let there be light. Funny because this way like a week or two ago.

 

It took me awhile to find the thread it's in. I knew I remembered seeing it here before somewhere.

86-88 inside fuse diagram thread

 

Thanks Man....still no juice at the dome light.

 

The door pin switches are what grounds the dome light. Should have constant 12 volt and then either the door switch or the switch on the dome light itself supplies the ground.

 

Will take out the switch and look at the back of it at some point.Also will remove the kick panels to see if I can access the plungers.This truck has had wiring problems as a new engine was installed and perhaps wiring diagrams were not followed.Anyone know the part # of the cold start injector time switch?The chilton manual I have has such small print on the diagrams I can't read it,besides my hands being shot from pinched nerves in the elbows.So often I have to wait and find help on repair issues.Can't really afford the shops as they're $95-$110 an hour in the California motherlode.Talk about a gold rush...Thanks for the replies.

 

thanks for the pic.

 

Thread revival...Thanks for the photo.

 

Does anyone know what color the primary power wire for the cabin fuse panel in an 84 Toyota
4x4