Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

92 Pickup Dash Cup Holder Where Can I Find One???

Old Feb 26, 2012 | 08:01 AM
  #1  
BIGTOY88's Avatar
Thread Starter
Registered User
iTrader: (1)
 
Joined: Jan 2012
Posts: 68
Likes: 0
From: SLC, UT
92 Pickup Dash Cup Holder Where Can I Find One???

Anyone know where I can find a factory in dash cup holder for a 92 pickup or by chance have one they would sell me? I have gone to every pick n pull within 50 miles with no luck and I refuse to pay $90 from the dealership for a cup holder. I've tried to find one online but no luck. The guy I bought the truck from took it out and put a stereo equalizer there that I took out so now I have a hole to fill and im tired of spilling my coffee in my lap so if anyone has any leads on one I would greatly appreciate it. Dont know if they made them in different colors for different interiors but I would prefer black or grey since that is what my interior is.
Reply
Old Feb 26, 2012 | 08:20 AM
  #2  
James Woods's Avatar
Contributing Member
iTrader: (1)
 
Joined: Oct 2010
Posts: 1,626
Likes: 1
From: Down by the River
I used to have one of those cheap ones that clip onto the heater vent, worked fine until I tried to put my Super Big Gulp in it.
Reply
Old Feb 26, 2012 | 08:27 AM
  #3  
BIGTOY88's Avatar
Thread Starter
Registered User
iTrader: (1)
 
Joined: Jan 2012
Posts: 68
Likes: 0
From: SLC, UT
Ya I found a few like that but no factory replacements. I want the factory one so I don't have that empty space anymore
Reply
Old Feb 26, 2012 | 08:28 AM
  #4  
sb5walker's Avatar
Registered User
 
Joined: Jan 2008
Posts: 1,085
Likes: 7
From: Connecticut
http://www.car-part.com Portal to hundreds of junkyards. One of them will ship it to you.
Reply
Old Feb 26, 2012 | 08:42 AM
  #5  
California's Avatar
Registered User
 
Joined: Jan 2012
Posts: 72
Likes: 1
From: Los Altos Hills, CA
I got my replacement off ebay. I paid $25 shipped after waiting for a good deal.

Click here to do a search.

Good Luck
Reply
Old Feb 26, 2012 | 09:03 AM
  #6  
bobby_duce's Avatar
Registered User
 
Joined: Apr 2010
Posts: 1,073
Likes: 27
From: enumclaw,wa
its not a dash cup holder but if you have a roll of duct tape it works very well. fits my coffee mug and bigger cups like a glove!

Reply
Old Feb 26, 2012 | 09:12 AM
  #7  
Mashashin's Avatar
Registered User
 
Joined: Nov 2011
Posts: 30
Likes: 0
From: Urbana, IL
I would have to say forget about the dash cup holders. What are you gonna put in there? If you put a can of road soda in there it may break the support that holds the little floppy bottom piece in place and then you'd lose your beverage all over yourself. I'd just goto wally world and get a pack of 4 cup holders that go between the window and the weather stripping inside of the door. In addition, the duct tape roll is genius!
Reply
Old Feb 28, 2012 | 06:39 AM
  #8  
BIGTOY88's Avatar
Thread Starter
Registered User
iTrader: (1)
 
Joined: Jan 2012
Posts: 68
Likes: 0
From: SLC, UT
California,

Thanks for the ebay suggestion. Bought one on there for $28 shipped. Way better than paying $90 from toyota
Reply
Old Feb 28, 2012 | 10:09 AM
  #9  
BajaToy616's Avatar
Registered User
 
Joined: Feb 2012
Posts: 13
Likes: 0
From: New York
I just listed one on ebay today for 20$ with 3.00$ shipping if you wanted it
Reply
Old Feb 28, 2012 | 11:11 AM
  #10  
California's Avatar
Registered User
 
Joined: Jan 2012
Posts: 72
Likes: 1
From: Los Altos Hills, CA
I'm glad it worked out for you.

Installation is a snap. Literally!
Reply
Old Mar 1, 2012 | 09:28 AM
  #11  
BIGTOY88's Avatar
Thread Starter
Registered User
iTrader: (1)
 
Joined: Jan 2012
Posts: 68
Likes: 0
From: SLC, UT
Well I thought it worked out for me until I opened up the package yesterday and it didn't come with the mount that screws into the dash that the cup holder slides in and out of :S Anybody have a extra mount laying around that they aren't using??
Reply
Old Mar 1, 2012 | 09:52 AM
  #12  
BMcEL's Avatar
Registered User
 
Joined: Aug 2010
Posts: 2,027
Likes: 1
From: Oregon, USA
Have you even tried a junkyard? At least half of the pickups/4runners I've seen in the yards around here still had the cupholder in it.
Reply
Old Mar 1, 2012 | 10:02 AM
  #13  
BIGTOY88's Avatar
Thread Starter
Registered User
iTrader: (1)
 
Joined: Jan 2012
Posts: 68
Likes: 0
From: SLC, UT
Wish that was the case around here. Ive tried every yard within a hundred miles and nothin!
Reply
Old Mar 1, 2012 | 10:26 AM
  #14  
Lumpy's Avatar
Registered User
 
Joined: Jan 2009
Posts: 6,086
Likes: 17
From: Just North of Pittsburgh
This is the one I use...Works great!!!


Reply
Old Sep 3, 2019 | 08:00 AM
  #15  
jimfitting's Avatar
Registered User
 
Joined: Sep 2019
Posts: 1
Likes: 0
Cup holder

Originally Posted by BIGTOY88
Anyone know where I can find a factory in dash cup holder for a 92 pickup or by chance have one they would sell me? I have gone to every pick n pull within 50 miles with no luck and I refuse to pay $90 from the dealership for a cup holder. I've tried to find one online but no luck. The guy I bought the truck from took it out and put a stereo equalizer there that I took out so now I have a hole to fill and im tired of spilling my coffee in my lap so if anyone has any leads on one I would greatly appreciate it. Dont know if they made them in different colors for different interiors but I would prefer black or grey since that is what my interior is.
Ebay has some in the $50.00 range
Reply
Old Sep 3, 2019 | 11:00 AM
  #16  
scope103's Avatar
Registered User
15 Year Member
 
Joined: Sep 2007
Posts: 8,383
Likes: 873
From: San Francisco East Bay
jimfitting -

Welcome to YotaTech!

I'm sure you realize you're responding to a 7-yr old thread. (The original poster hasn't been around in that long, as well.)

But, you may just be providing information in case someone else reads the thread. Thanks! But can I suggest that if you "know" of a source, that you provide a link, rather than just make a vague reference to a market place? Like https://www.ebay.com/itm/B-1-89-95-T...t/182329667061

FWIW, before anyone drops "$50.00 range" on a used piece pulled from a junk truck, one might want to check the price of a NEW part:
https://parts.lakelandtoyota.com/p/T...562089102.html
($55.82)
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sonic concepts
Newbie Tech Section
3
Aug 16, 2025 03:13 PM
Aleeex_u
86-95 Trucks & 4Runners
10
Jun 5, 2016 06:52 PM
Valvoman
86-95 Trucks & 4Runners
3
Jun 28, 2015 02:45 PM
WI Girl
95.5-2004 Tacomas & 96-2002 4Runners
5
Jun 25, 2015 03:45 AM
NerfHerder-97SR5-
95.5-2004 Tacomas & 96-2002 4Runners
8
Jul 31, 2002 11:50 AM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 02:44 PM.