YotaTech Forums - View Profile: scope103

Notices

scope103 scope103 is online now

Registered User

About Me

  • About scope103
    Location
    San Francisco East Bay
    My Rig
    1994 4WD SR5 - all stock
  • Signature
    1994 6cyl (3VZE) 4wd (A340H) XCab SR5 truck -- all stock (well, mostly)

Statistics

Total Posts
Visitor Messages
Total Likes
General Information
  • Last Activity: 06-17-2019 11:17 AM
  • Join Date: 09-13-2007

Visitor Messages

Showing Visitor Messages 1 to 8 of 8
  1. 05-10-2017 09:55 PM - permalink
  2. MichaelKLerner
    09-17-2015 02:10 PM - permalink
    Hi, Can you help me get started in Yotatech? I don't know anybody here. I don't know if I need to upgrade my membership. I don't know how to start a thread. And I don't know how to find out. --Michael
  3. Janos01
    08-19-2015 07:18 AM - permalink
    Hey Scope, do you know of any links where I can get a FSM for my 1990 4runner?
  4. 07-18-2013 04:44 PM - permalink
    Hey Scope, looking for a fuel pressure damper for best price.. Im in Dublin Ca, east bay. Where did you find yours for $113? Cheapest dealer i found was 150, plus washers. Would love to hear back. You can message me here or email [email protected]
  5. 03-09-2013 10:03 AM - permalink
    Aloha Scope, got a question for you if you don't mind. What can it be if the idle goes up and down as if it is going to die. It does die sometimes if you don't keep your foot on the gas paddle. Do you know what can cause this to happen? Can you please get back to me on your earliest convience I would really appreciate it Thank you so much for your time!
  6. 02-16-2013 11:40 AM - permalink
    No I don't have a FSM
  7. 02-16-2013 11:28 AM - permalink
    Hey scope,

    Thanks for responding....I just recently had the top half of the motor overhauled due to blown heads. Ever since then I had a oil leak that started and now it is pretty bad. We took it in to get an estimate and mechanic said they really didnt know where the leak was coming from until he pull the front cover off. But he said it looks like it is leaking from the front main seal. So he was gonna replace all three seals but I can't afford it so gonna try and do it myself with a help of a friend. Hard to tell where the oil coming from too becuz the oil is all over the place. No I don't have a
  8. 04-14-2009 02:21 PM - permalink
    Hey Scope,

    I've got no voltage drop at the clock with doors open or close (~12v either way). The black with white stripe wire that comes out of the clock and becomes the power wire that goes to the light reminder relay, inspection socket, door lights, map light and dome light gives ~12volts with the door closed and drops to 0.34 volts with the door open.

    Also there is no voltage drop at the cig or dome fuse when opening the doors. voltage is ~12+ volts either way.

    From your diagnosis, what would you say is the problem and what's the next step in tracking in down?

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.