SE4RJ 05 Picture Thread
May 22, 2005 | 05:28 PM
#182
Contributing Member
Joined: Jul 2002
Posts: 411
Likes: 0
From: McLean, VA
Originally Posted by turboale
haha, you guys are funny... 
Chris, Don't forget the URD kit... thats a big difference. And, my shifts are now quicker too... 
Also, don't plan on gett'n 35s unless all you want to smell is my dual exhaust! 
Well, it was closer than I was expecting... I'd like to see what happens from a stop. I can't wait til next time also! By that time I should have a chip and exhaust ( Just got the cold air intake and short shifter in) They say 10-12hp each... and that the US version of the R actually is 250hp not 240. So that puts me at about 280 all motor and 60lbs less. Should be a good time
I also just had my 20k service (which includes a tune up) and damn... it made such a difference! I couldn't believe it. Anyway, can't wait for the rematch sherp! It should be a good race!
PS, andy... got a couple for you to choose from. Either of these work?
Chris, Don't forget the URD kit... thats a big difference. And, my shifts are now quicker too... Also, don't plan on gett'n 35s unless all you want to smell is my dual exhaust! Well, it was closer than I was expecting... I'd like to see what happens from a stop. I can't wait til next time also! By that time I should have a chip and exhaust ( Just got the cold air intake and short shifter in) They say 10-12hp each... and that the US version of the R actually is 250hp not 240. So that puts me at about 280 all motor and 60lbs less. Should be a good time
I also just had my 20k service (which includes a tune up) and damn... it made such a difference! I couldn't believe it. Anyway, can't wait for the rematch sherp! It should be a good race!PS, andy... got a couple for you to choose from. Either of these work?
I too wonder what would have happend if we had gone from a dead stop. I haven't tuned 1st or 2nd for wide open throttle. I'll have to get this all taken care of so we can have that rematch!
-Sherpa
May 22, 2005 | 05:32 PM
#183
Contributing Member
Joined: Jul 2002
Posts: 411
Likes: 0
From: McLean, VA
Originally Posted by turboale
Awesome, this car should be about the same. A guy with nothing but a cone filter (usually takes power) and the exhaust flap mod got a 13.91 @ 99.7mph, 1.97 60ft
-S
May 22, 2005 | 05:38 PM
#184
Contributing Member
Joined: Jul 2002
Posts: 411
Likes: 0
From: McLean, VA
Originally Posted by Hyperlite
Chris uh I hope you don't like your head cause It looks like the begining shot to the movie Faces of Death.
Taco -->
<-- Chris
Taco -->
<-- Chris
May 22, 2005 | 05:53 PM
#185
Originally Posted by yotaman
Uninstall everything pertaining to the camera (all software), restart your computer, now plug the camera up and then turn it on. Windows XP should recognize the connection and give you a choice as to what you want to do. You should get a prompt and one of the choices should be “Microsoft Scanner and Camera Wizard”, Double left click on that and just follow the steps.
Let me know if It works or doesn’t.
EDIT: Chris give it a try too.
Let me know if It works or doesn’t.
EDIT: Chris give it a try too.
Tried it and it got an installation wizard, but for some reason now it can't find the software-I have the cd in the drive. WTF? This is really pissing me off.
Edit: I give up, I'm just gonna smash the camera and the computer!
I'll keep the vid tape though.
Last edited by dragr1; May 22, 2005 at 06:15 PM.
May 22, 2005 | 06:30 PM
#186
Registered User
Joined: Sep 2002
Posts: 17
Likes: 0
From: AL
Camcorder Help
No problems on mine Brett. I loaded XP a few weeks ago, loaded the camcorder softwear the next night. No problems here. You can always bring it with you to my house and pull the vids off the tape, or get me the tapes and I can do it.
NOTE: The pixela instructions note that XP users must be logged in as an administrator to load the softwear, but I didn't!
SIDENOTE: You are clicking the movie/tape button on the left side of the screen and not the memory stick button...right?
NOTE: The pixela instructions note that XP users must be logged in as an administrator to load the softwear, but I didn't!
SIDENOTE: You are clicking the movie/tape button on the left side of the screen and not the memory stick button...right?
May 22, 2005 | 07:16 PM
#187
Originally Posted by mysticpur
No problems on mine Brett. I loaded XP a few weeks ago, loaded the camcorder softwear the next night. No problems here. You can always bring it with you to my house and pull the vids off the tape, or get me the tapes and I can do it.
NOTE: The pixela instructions note that XP users must be logged in as an administrator to load the softwear, but I didn't!
SIDENOTE: You are clicking the movie/tape button on the left side of the screen and not the memory stick button...right?
NOTE: The pixela instructions note that XP users must be logged in as an administrator to load the softwear, but I didn't!
SIDENOTE: You are clicking the movie/tape button on the left side of the screen and not the memory stick button...right?
Whoa, wasn't expecting to see you on here-it's been a while! Yeah, I'm clicking the right button. I'm not logged on as an administrator though-I'll have to try that.
May 23, 2005 | 01:58 PM
#189
Registered User
Joined: Jul 2003
Posts: 1,035
Likes: 0
From: Mooresville (Lake Norman) NC
Originally Posted by Sherpa
I've never seen FoD. Is there really a video of someone getting run over like that?
May 23, 2005 | 06:22 PM
#190
Fall Colors 2 - Summertown, Tn
May 23, 2005 | 06:32 PM
#191
Registered User
Joined: Mar 2005
Posts: 1,165
Likes: 6
From: Cumming, GA
Originally Posted by dragr1
Whoa, wasn't expecting to see you on here-it's been a while! Yeah, I'm clicking the right button. I'm not logged on as an administrator though-I'll have to try that.
Do you have any spare 3rds with elockers or know where I can get one for a reasonable price?
EDIT: I'm going to post a wanted ad in the classified section but if anyone knows where I can get a 3rd with an elocker I'm looking to buy one, soon.
Last edited by yotaman; May 23, 2005 at 06:36 PM.
May 23, 2005 | 08:39 PM
#192
Originally Posted by yotaman
Brett,
Do you have any spare 3rds with elockers or know where I can get one for a reasonable price?
EDIT: I'm going to post a wanted ad in the classified section but if anyone knows where I can get a 3rd with an elocker I'm looking to buy one, soon.
Do you have any spare 3rds with elockers or know where I can get one for a reasonable price?
EDIT: I'm going to post a wanted ad in the classified section but if anyone knows where I can get a 3rd with an elocker I'm looking to buy one, soon.
I have a 3rd, but no-elocker third. The third I have has 3.90 gears and no locker.
May 23, 2005 | 08:52 PM
#193
Registered User
Joined: Mar 2005
Posts: 1,165
Likes: 6
From: Cumming, GA
Originally Posted by dragr1
I have a 3rd, but no-elocker third. The third I have has 3.90 gears and no locker.
I’ve decided to mod my rear axle and install an e-locker instead of an EZ Locker so I need a 3rd with the e-locker. If you come across one let me know.
I’m looking to spend around $275-$375 on one (3rd with e-locker) sense I'll have to re-gear it. I have 4.88’s now.
EDIT: What locker are you running in the rear?
EDIT, EDIT: Never mind I read your sign. :pat:
Last edited by yotaman; May 23, 2005 at 08:55 PM.
May 23, 2005 | 09:04 PM
#194
Originally Posted by yotaman
OK Thanks.
I’ve decided to mod my rear axle and install an e-locker instead of an EZ Locker so I need a 3rd with the e-locker. If you come across one let me know.
I’m looking to spend around $275-$375 on one (3rd with e-locker) sense I'll have to re-gear it. I have 4.88’s now.
EDIT: What locker are you running in the rear?
EDIT, EDIT: Never mind I read your sign. :pat:
I’ve decided to mod my rear axle and install an e-locker instead of an EZ Locker so I need a 3rd with the e-locker. If you come across one let me know.
I’m looking to spend around $275-$375 on one (3rd with e-locker) sense I'll have to re-gear it. I have 4.88’s now.
EDIT: What locker are you running in the rear?
EDIT, EDIT: Never mind I read your sign. :pat:
Hehe, yeah I love the e-locker. Look for jonathan, he just bought an e-locker at a good price-he may know where there is another one.
May 23, 2005 | 09:11 PM
#195
Registered User
Joined: Mar 2005
Posts: 1,165
Likes: 6
From: Cumming, GA
Originally Posted by dragr1
Hehe, yeah I love the e-locker. Look for jonathan, he just bought an e-locker at a good price-he may know where there is another one.
Last edited by yotaman; May 23, 2005 at 09:18 PM.
May 23, 2005 | 09:13 PM
#196
Originally Posted by yotaman
Yeah there are a lot of advantages to having the e-locker instead of a lunchbox locker or even an ARB. I just wise I could put an e-locker in the front my rig.
Dang it's late what the_______ I'm I doing up?
May 23, 2005 | 09:16 PM
#197
Registered User
Joined: Mar 2005
Posts: 1,165
Likes: 6
From: Cumming, GA
Originally Posted by dragr1
Well, you could if you did a SAS.
Dang it's late what the_______ I'm I doing up?
Dang it's late what the_______ I'm I doing up?
EDIT: and maybe a marlin crawler!!!
May 24, 2005 | 11:06 AM
#200
Registered User
Joined: Mar 2005
Posts: 1,165
Likes: 6
From: Cumming, GA
Originally Posted by Hyperlite
I have an extra E-locker in the storage shed. It has 4.30 gears with the harness and switch.
Does anyone know a good place to get the 3rd regeared? I need it regeared to 4.88.
