My LPSV mod
04-28-2011, 05:56 AM
#21
Registered User
Join Date: Oct 2009
Location: Downtown Heckronto, Ontario, Soviet Canuckistan
Posts: 1,499
Likes: 0
Received 1 Like
on
1 Post
^^^ My manual valve is attached to the firewall on the passenger side. I've been thinking about relocating it inside the cab because it would be easier to make adjustments on the fly without having to stop and get out until the brakes feel right.
Last edited by Magnusian; 04-28-2011 at 05:57 AM.
04-28-2011, 06:19 AM
#22
I ran mine line that for about 12 years:
http://www.4crawler.com/4x4/4R_suspe...ortioningValve
Before I removed it when I swapped in rear disc brakes. Works well and does make it adjustable. Basically eliminates the Load Sensing part of the valve.
http://www.4crawler.com/4x4/4R_suspe...ortioningValve
Before I removed it when I swapped in rear disc brakes. Works well and does make it adjustable. Basically eliminates the Load Sensing part of the valve.
07-17-2011, 09:23 PM
#24
Registered User
Join Date: Jun 2010
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Glad I found this. My new trail rig came had an LSPV delete in it when I bought it with nothing but a bent over piece of brake line to compensate for it
Its not real fun moving your rig around the yard and having to brake ten feet in advance to avoid hitting the cat, so I guess we're gonna have to reinstall this bad boy.
Its not real fun moving your rig around the yard and having to brake ten feet in advance to avoid hitting the cat, so I guess we're gonna have to reinstall this bad boy.
Thread
Thread Starter
Forum
Replies
Last Post
TheBFA
Solid Axle Swaps, All Years
8
02-15-2020 06:55 AM
voiddweller
86-95 Trucks & 4Runners (Build-Up Section)
53
02-01-2016 05:46 AM
