95.5-2004 Tacomas & 96-2002 4Runners 4th gen pickups and 3rd gen 4Runners

HELP: no brake lights

Thread Tools
 
Search this Thread
 
Old May 4, 2004 | 07:37 PM
  #1  
BLKNBLU's Avatar
Thread Starter
Registered User
20 Year Member
iTrader: (1)
 
Joined: Mar 2004
Posts: 2,130
Likes: 1
From: Arizona
HELP: no brake lights

Everything else works back there. Parking light, tail light, turn signals, reverse lights. Unfortunately, I don't know how long this has been this way so I can't say if it is related to other activity under the hood. But it has been a long time since I've done much of anything under there except oil changes. Fuses are good, bulbs have been replaced (even though i didn't think it was that) and as I noted, every other light back there works. The haynes manual shows the taillights on a 15A circuit, but I don't have a 15A circuit. That's in the under hood fusebox. Am I missing something? Secondary fuse, relay, switch... something? I hate electrical stuff.
Reply
Old May 4, 2004 | 07:45 PM
  #2  
bike4miles's Avatar
Contributing Member
 
Joined: May 2004
Posts: 3,400
Likes: 0
From: Tucson, AZ
Replace the brake fuse just for fun (sometimes they go bad and they look good) and check the sockett with a test light for starters. Then I would try checking the wires to see if the insuation has won through anyware causing a short circut. After that??? That's about all I can think of.

Last edited by bike4miles; May 4, 2004 at 08:13 PM.
Reply
Old May 4, 2004 | 08:06 PM
  #3  
BLKNBLU's Avatar
Thread Starter
Registered User
20 Year Member
iTrader: (1)
 
Joined: Mar 2004
Posts: 2,130
Likes: 1
From: Arizona
thanks. will do.
Reply
Old Jun 27, 2004 | 11:30 PM
  #4  
88-4RUNA's Avatar
Registered User
 
Joined: Jun 2004
Posts: 48
Likes: 0
From: Phoenix, AZ
did you ever fix this problem? IF so what was the cause im currently having this same issue.
Reply
Old Jun 28, 2004 | 04:09 AM
  #5  
HondaTec521's Avatar
Registered User
 
Joined: Apr 2004
Posts: 220
Likes: 0
From: SoCal
Two words , "TEST LIGHT "
Reply
Old Jun 28, 2004 | 04:53 AM
  #6  
X-AWDriver's Avatar
Contributing Member
 
Joined: Sep 2003
Posts: 10,549
Likes: 0
From: Littleton,CO
Check the bulbs to make sure they are seated properly,I had the same problem with everything working fine but no brake lights and it was just that the bulbs weren't pushed all the way in. Doh!!!
Reply
Old Jun 28, 2004 | 09:17 PM
  #7  
88-4RUNA's Avatar
Registered User
 
Joined: Jun 2004
Posts: 48
Likes: 0
From: Phoenix, AZ
Originally Posted by HondaTec521
Two words , "TEST LIGHT "
I have a test light but i dont know exactly which fuse is for the brake light, my fuse cover is missing and my service manual doesnt show what each fuse is for. I checked all fuses under the dash visually and they all look good.

Whats the purpose of the switch near the bottom of the emergency brake? My manual makes no mention of it, and when i release my emergency brake it doesnt even touch it.

Btw Hondatec521, would you happen to be a member of honda-tech.com?
Reply
Old Jun 28, 2004 | 09:42 PM
  #8  
zach34's Avatar
Registered User
 
Joined: Jun 2004
Posts: 40
Likes: 0
From: Missouri
Yeah, just make sure everything is pushed all the way in. I had the same problem on my truck.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ashersullivan88yota
86-95 Trucks & 4Runners
24
Jan 18, 2022 05:37 PM
fountain
86-95 Trucks & 4Runners
5
Dec 31, 2015 06:08 AM
GreatLakesGuy
The Classifieds GraveYard
8
Sep 4, 2015 09:27 AM
Sandman
86-95 Trucks & 4Runners
8
Jul 14, 2015 12:36 PM
Johntom240
General Electrical & Lighting Related Topics
7
Jul 13, 2015 12:18 AM




All times are GMT -8. The time now is 04:14 AM.