Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

my horn hazards dome lights and headlights work but power locks windows dash radio do

Thread Tools
 
Search this Thread
 
Old May 25, 2014 | 03:10 PM
  #1  
rockmann's Avatar
Thread Starter
Registered User
 
Joined: May 2014
Posts: 5
Likes: 0
my horn hazards dome lights and headlights work but power locks windows dash radio do

Not the batterybor ground, is a manual and was able to push start
Please help, I don't think its in the ignition since the locks should work without the key. Fuses by drivers kick panal are ok

Last edited by rockmann; May 25, 2014 at 03:14 PM.
Reply
Old May 26, 2014 | 08:44 PM
  #2  
rockmann's Avatar
Thread Starter
Registered User
 
Joined: May 2014
Posts: 5
Likes: 0
quick response

Wow thanks!
Reply
Old May 27, 2014 | 12:00 AM
  #3  
wyoming9's Avatar
Registered User
iTrader: (1)
 
Joined: Apr 2009
Posts: 13,381
Likes: 100
From: I live in New Tripoli Pa out in the woods
Red face

Well it might have helped if you had listed just what your working on.

No place but the basics without year and model

What you have checked??

Just what voltage did you read at the battery???

How have you ruled out your ground system is not the problem??

Fuse box under the hood?? Fusible links??

How did this happen all by itself sitting overnight??
Reply
Old May 27, 2014 | 10:42 AM
  #4  
rockmann's Avatar
Thread Starter
Registered User
 
Joined: May 2014
Posts: 5
Likes: 0
1990 4runner

Batt volt=12.58
Fusable links would be next to check
I am thinking ground is suspect. Weird that much of the system has power though.
Its old and has 253k miles so anything is possible. Was sitting about two weeks before this happened when trying to start.
Reply
Old May 27, 2014 | 01:43 PM
  #5  
wyoming9's Avatar
Registered User
iTrader: (1)
 
Joined: Apr 2009
Posts: 13,381
Likes: 100
From: I live in New Tripoli Pa out in the woods
Red face

One step at time one circuit at a time.

trying to trouble shoot to much at once just causes frustration

looks like the circuits going through the ignition switch

the ones that you have listed as working don`t
Reply
Old May 27, 2014 | 02:46 PM
  #6  
RAD4Runner's Avatar
Registered User
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Mar 2012
Posts: 7,125
Likes: 681
Originally Posted by rockmann
Fuses by drivers kick panal are ok
You sure that fuse for the things that do not work are in there?
Got Schematic?
1990 Runner? 22R-E? V6?
A problem well-stated is a problem half-way to getting solved.

Originally Posted by rockmann
Batt volt=12.58
Fusable links would be next to check.
NOTHING (except a winch) would work if fusible link is bad.

Originally Posted by wyoming9
One step at time one circuit at a time.
trying to trouble shoot to much at once just causes frustration...
Exactly.

looks like the circuits going through the ignition switch
the ones that you have listed as working don`t
Dome and horn should work even without ignition switch.
Reply
Old May 27, 2014 | 07:14 PM
  #7  
rockmann's Avatar
Thread Starter
Registered User
 
Joined: May 2014
Posts: 5
Likes: 0
locks

I was about to replace the ignition switch but power locks don't need the ignition on. Trust me this is a weird one, more than 20 years as a tech with excellent troubleshooting. I'm going to start over with the ground and maybe a short coming off the batt terminal
Reply
Old May 27, 2014 | 07:19 PM
  #8  
rockmann's Avatar
Thread Starter
Registered User
 
Joined: May 2014
Posts: 5
Likes: 0
1990 4runner 3.0 5 speed SR5

what works: headlights,taillights, horn,dome lights, ignition buzzer, hazard lights.
What don't work: power mirrors,power locks, power windows, radio, turn signals, dashboard, starter
Reply
Old May 27, 2014 | 09:38 PM
  #9  
RAD4Runner's Avatar
Registered User
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Mar 2012
Posts: 7,125
Likes: 681
Your original title is confusing...
"my horn hazards dome lights and headlights work but power locks windows dash radio do"


Originally Posted by rockmann
what works: headlights,taillights, horn,dome lights, ignition buzzer, hazard lights.
What don't work: power mirrors,power locks, power windows, radio, turn signals, dashboard, starter
Again, got schematic so those who understand it can help??

Unless someone hacked your wiring, typically:
Power locks, headlights, taillights/dashboard lights, and hazard lights do not need accessory or ignition on.

Radio needs accessory on.

Power windows, power mirrors, turn signals, dashboard indicators/error lights need ignition on.

Last edited by RAD4Runner; May 27, 2014 at 09:47 PM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
odonekanobe
86-95 Trucks & 4Runners
4
Jun 26, 2015 02:27 PM
toy89yota
Vehicles - Trailers (Complete)
0
Jun 24, 2015 01:18 PM
bobbybouche
86-95 Trucks & 4Runners
0
Jun 18, 2015 10:22 AM
Beavah
95.5-2004 Tacomas & 96-2002 4Runners
9
Nov 12, 2013 07:31 PM
Dr. Evil
95.5-2004 Tacomas & 96-2002 4Runners
8
Jun 7, 2002 09:19 AM




All times are GMT -8. The time now is 05:09 PM.