Thanks to this forum I have (almost) successfully taken the heads off my 93 3zve, had them milled down, put them back on and everything else together... except 2 wires and 1 hose that I can't figure out for the life of me. I've searched the forum with no avail.

These are the wires. They come of the drivers side of the wiring harness.

and this hose goes toward fire wall

all I have left is:
Oil
Coolant
Battery
and these 3 leftover bits

HELP!!

 

The hose is coolant to the throttle body.

I can't tell much about the wires; is one of them the alternator control lead?

(Get yourself a box of nitrile gloves for about $8. Not only will your significant other notice your cleaner hands, but you'll at least look like a pro.)

 

Round gray connector goes onto oil pressure sending unit.

edit: Guess your links aren't working...

 

 

Thanks so much guys!!
scope103- You were right, I just needed to look closer.
vasinvictor- I got the oil sensor one, but the other I still don't see anywhere close. And thanks for the photo help!!

So she's up and running now. I messed up something on the exhaust, but it works!!! That was the most into an engine I've been. I would've had SOOO much more frustration if it wasn't for this forum!!!

 

Oh and I looked all over the alternator and nothing for the connector that's lower left in the photo. The truck runs without it, so I'll be looking for a random problem to arise to give me a clue. Any ideas??