Pre 84 Trucks (Build-Up Section) Post your build-ups here

toyospearo's 1982 Pickup Build-Up Thread

Thread Tools
 
Search this Thread
 
Old May 16, 2010 | 02:12 PM
  #1  
toyospearo's Avatar
Thread Starter
Registered User
15 Year Member
 
Joined: May 2008
Posts: 3,277
Likes: 23
From: way way nor cal
Talking toyospearo's 1982 Pickup Build-Up Thread

I picked up this 82 here on the north coast of CA. I looked and looked and this one kind of found me . The guy I got it from took really good care of it over the years but the rust got to be too much for him. He parked it, started it every now and again over the years and then he decided to let it go.
When I got it it was leaking oil from the valve cover and the oil pan. The output shaft seal was leaking as well. There are rust problems galore. I picked up new front leafs and a rebuild kit with bearings, new front rust free fenders and u bolt flip kits.
So far I have fixed all the gear oil and oil leaks, flushed the system and replaced most of the gaskets.
Below is the rig and a few mods... I plan on updating regularly so stay tuned.
The day I got it.



these came with it...

Finally got a decent welder!!

fixing rot..


more rot..


bondo to smooth it out (thanks Bindergirl!)

surf shot to keep from getting bored...


After fixing all the oil leaks I decided to rebuild the carb. I got a Napa kit and went to town!


back on, shiny as hell and running like a champ!!


New carpet goes in this week and much more to come!!

Last edited by toyospearo; Jun 27, 2010 at 10:03 PM.
Reply
Old May 16, 2010 | 02:14 PM
  #2  
mightymouse's Avatar
Registered User
iTrader: (6)
 
Joined: Apr 2009
Posts: 1,756
Likes: 12
From: high ridge
coooool! scribed.
Reply
Old May 16, 2010 | 03:00 PM
  #3  
BackGateYota92's Avatar
Registered User
 
Joined: Nov 2009
Posts: 1,356
Likes: 1
From: Windsor,Virginia
cool build man, i hope it ends up as nice as your other truck!!!
Reply
Old May 16, 2010 | 03:04 PM
  #4  
BigBluePile's Avatar
Contributing Member
15 Year Member
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Dec 2006
Posts: 15,192
Likes: 190
From: Sedro-Woolley, WA
Freakin sweet dude!! Where's that rock shot from?
Reply
Old May 16, 2010 | 03:04 PM
  #5  
2DoorRunner's Avatar
Banned
 
Joined: Oct 2008
Posts: 3,743
Likes: 2
From: Brier, Washington
Subscribed. Cant wait to see what you do with this one!
Reply
Old May 16, 2010 | 03:07 PM
  #6  
toyospearo's Avatar
Thread Starter
Registered User
15 Year Member
 
Joined: May 2008
Posts: 3,277
Likes: 23
From: way way nor cal
Originally Posted by BigBluePile
Freakin sweet dude!! Where's that rock shot from?
Up near Patricks Point
Reply
Old May 16, 2010 | 03:10 PM
  #7  
92 TOY's Avatar
YotaTech Milestone-Two Millionth Post
 
Joined: Jan 2009
Posts: 12,009
Likes: 122
From: Northeast Pennsylvania
subscribed...good to see
Reply
Old May 16, 2010 | 03:23 PM
  #8  
BigBluePile's Avatar
Contributing Member
15 Year Member
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Dec 2006
Posts: 15,192
Likes: 190
From: Sedro-Woolley, WA
Originally Posted by toyospearo
Up near Patricks Point
Nice!!! Good stuff there!
Reply
Old May 20, 2010 | 11:59 AM
  #9  
HuKiT's Avatar
Registered User
 
Joined: Feb 2010
Posts: 44
Likes: 1
From: Colorado
Let’s see that carpet job. Makin' me jealous with the surf shot.
Reply
Old May 20, 2010 | 01:26 PM
  #10  
1981 yota's Avatar
Registered User
 
Joined: Jul 2009
Posts: 1,639
Likes: 4
From: Cle Elum washington
subscribein love the first gens
Reply
Old May 20, 2010 | 01:32 PM
  #11  
toyospearo's Avatar
Thread Starter
Registered User
15 Year Member
 
Joined: May 2008
Posts: 3,277
Likes: 23
From: way way nor cal
This is precious. SO, I just got done working on a commercial for.. wait wait for it, wait.......


JEEEEEPPP!!! ahhahah I just spent two weeks with the creative team from Jeep working on the new Grand Cherokee ad. All the guys on the job had built jeeps, CJ's, Grand Wagoneers etc. I was the whipping boy because I have built Yota's ahhaha. They were actually really nice guys to work with and a few of them even said they liked Yota's but had to be loyal to Chrysler. ahhah
The irony of it all was most of the money I made on the job went to buying parts for my 82
Here are a few pics.
Oregon dunes..BTW that is a prototype for the commercial. Price tag $500,000. after we are done with the ad the ENTIRE rig gets destroyed due to liability issues.

My idea..

foggy jeep..


FINALLY I bought a decent ratchet and screwdrivers!!!


Almost done with my new motor.. I am kinda of torn between taking the motor thats in it now out and putting this one in. The compression on the one in it now is perfect and after I did the carb rebuild the thing runs great. No leaks, super strong. I think I am going to drive it till it fails and store this new one. Not sure what to do.. DAMN Toyotas never die..

another 22r porn shot..

this is what is next.. full front end rebuild with new OME leafs!!!

Last edited by toyospearo; Jul 14, 2010 at 06:50 PM.
Reply
Old May 20, 2010 | 01:38 PM
  #12  
1981 yota's Avatar
Registered User
 
Joined: Jul 2009
Posts: 1,639
Likes: 4
From: Cle Elum washington
Originally Posted by toyospearo
This is precious. SO, I just got done working on a commercial for.. wait wait for it, wait.......


JEEEEEPPP!!! ahhahah I just spent two weeks with the creative team from Jeep working on the new Grand Cherokee ad. All the guys on the job had built jeeps, CJ's, Grand Wagoneers etc. I was the whipping boy because I have built Yota's ahhaha. They were actually really nice guys to work with and a few of them even said they liked Yota's but had to be loyal to Chrysler. ahhah
The irony of it all was most of the money I made on the job went to buying parts for my 82
Here are a few pics.
Oregon dunes..BTW that is a prototype for the commercial. Price tag $500,000. after we are done with the ad the ENTIRE rig gets destroyed due to liability issues.

My idea..

foggy jeep..

I double as the fog guy..

FINALLY I bought a decent ratchet and screwdrivers!!!

Oh and I shot a fish this morning...
thats one creepy lookin fish
Reply
Old Jun 27, 2010 | 08:56 PM
  #13  
UpTheYotaPunx's Avatar
Registered User
 
Joined: Jun 2009
Posts: 99
Likes: 0
From: North Shore, Mass.
got any updates?!
Reply
Old Jun 27, 2010 | 09:28 PM
  #14  
toyospearo's Avatar
Thread Starter
Registered User
15 Year Member
 
Joined: May 2008
Posts: 3,277
Likes: 23
From: way way nor cal
got a few things done this week. Pulled the hood off, repaired and bondoed it. Got new front fenders primered and ready. Cut the front bumper off and getting it ready for a front end rebuild. I busted off at least 4 bolts and tomorrow I need weld in new metal..
Hood sanded and waiting for primer..
Pulled this diamond plate off the lower doors and lower body. EVERY 1st gen I have seen in this area the doors and lower body are rotted. The PO put them on when he got it back in 82 to prevent rust. It worked!



Hood ready for paint..

Had to cut out rust on the tailgate..


Nice paint job..almost hate to paint over it

Last edited by toyospearo; Jun 27, 2010 at 09:44 PM.
Reply
Old Jun 27, 2010 | 09:30 PM
  #15  
toyospearo's Avatar
Thread Starter
Registered User
15 Year Member
 
Joined: May 2008
Posts: 3,277
Likes: 23
From: way way nor cal
a few more..

Last edited by toyospearo; Jun 27, 2010 at 09:39 PM.
Reply
Old Jun 27, 2010 | 09:37 PM
  #16  
UpTheYotaPunx's Avatar
Registered User
 
Joined: Jun 2009
Posts: 99
Likes: 0
From: North Shore, Mass.
wow that hood looks amazing, cant wait to see more!
Reply
Old Jun 27, 2010 | 09:40 PM
  #17  
toyospearo's Avatar
Thread Starter
Registered User
15 Year Member
 
Joined: May 2008
Posts: 3,277
Likes: 23
From: way way nor cal
Thanks, should have the tailgate close to done by tomorrow.
Reply
Old Jun 27, 2010 | 09:50 PM
  #18  
881stGenRunner's Avatar
Registered User
20 Year Member
Liked
 
Joined: Mar 2006
Posts: 2,586
Likes: 9
From: Atlanta, GA
Good stuff dude, subscribing to this one as well. Rigs are looking great
Reply
Old Jun 28, 2010 | 06:50 AM
  #19  
slacker's Avatar
Registered User
20 Year Member
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Jan 2006
Posts: 6,382
Likes: 302
From: BC Canada
lookin' good ... nice welder as well



.
Reply
Old Jul 14, 2010 | 06:29 PM
  #20  
toyospearo's Avatar
Thread Starter
Registered User
15 Year Member
 
Joined: May 2008
Posts: 3,277
Likes: 23
From: way way nor cal
This little truck is working the few last nerves I have left!
Lots of rust which I knew about. I thought I would be able to fix the driver side door but it is not to be. I ended up getting another in decent shape.
I would not have taken all this on had the frame been rotten. The frame is in surprisingly good shape.
I hope to have the body work completed by next week and then paint!!
here is some carnage!





tomorrows nightmare..

Last edited by toyospearo; Jul 14, 2010 at 06:47 PM.
Reply



All times are GMT -8. The time now is 03:45 PM.