I was doing some work on the truck and noticed these two wires laying by the passender fender. They aren't connected to anything and that seems strange to me. Anybody know what they connect to?

 

hmm, doesnt look familiar. i would say to just look all around in there fro something to plug into. those look like factory toyota plugs...

 

Yeah, they're factory. I looked around for about an hour and couldn't find anything that was unplugged.

 

hmm, maybe someone who is more knowledgeable will chime in.

 

THey may just go to an option that you don't have and therefore don't need to be plugged in.

 

Do you have manual hubs? Those i think go to the ADD solenoids to activate 4wd.



My rig also has random wires and stuff like that for options that weren't chosen for my rig.

 

I would also guess an option you dont have, as long as evrything is working fine as it is...I also have a few plugs that dont attach to anything.

And whats with the electrical tape over all the wires, I thought my trucks PO had done a hack job or 10. But seems like there all like that.

 

I guess I should have added my specs.

95 3VZE
139987K
2WD

The only thing that doesn't work on my truck is the rear wiper when I hit the washer for it. The fluid squirts but the wiper doesn't move. The wiper works if I turn it on, but not if I use just the washer. That being said, I haven't been able to find anything near the washer fluid reservoir that is disconnected. Is there another connection for the rear wiper somewhere?

 

ADD system for sure %100 you dont need them if you have 2wd

 

as to where they would bolt to... they go to the passanger side fender but again if you have 2wd you have no use for them just tie them back

 

What colors do specifically do go to the ADD ?????
anyone know

I have a V6 from arunner that had ADD and now is in a truck with nothing of that sort in it as of now, only manual hubbs with no need for the ADD hook ups.

Anyone got an idea what colors I can get rid of???