Beg to differ the places that thing can go I bet. We actually wheel with a guy who runs 33's. Ive seen him go places you wouldn't even imagine possible. He does have a solid axle and is locked but no cases. It does help alot having the SA but even with just a rear locker the places you could go aren't to far fetched.

BTW when are you gonna get that 3.4 you have put in? Need some help sometime let me know!

Most of all when are you gonna start ???

 

lol racing season takes up all my damn time.

The 3.4L and the SAS are going into two different rigs, at least thats the plan for now.

I have a spool in the rear of my 87, hopefully it will perform better than that stupid lockright I had

 

Oh yeah I love my welded rear. I guess I also love the ARB too It makes a cool hisssss sound when I press a button Ah I love it

Not the biggest fan of the lockright myself!

I know the feeling of lost time. My work takes too much damn time up from me! Anyone want to hire me to fab some stuff??? I want a job that s fun not time waisting and boring It does pay the bills I guess

Again dude you need some help just let me know. A SAS could take one weekend and the 3.4 another Lets get to and

 

Its all about the cash my friend. And space lol. A one car garage isn't conducive to a fabricating environment. I have a guy who can do the fab on my 4runner, i just need the space and money. But I will be contacting you for sure...cash in them favors lol.

First thing, i need to build up my front axle so its a one day swap. I plan on going Hi-pinion, ARB, stock 4.10's, Hi-steer, bobby longs, and brake upgrade.

 

Did my fab work here



Damn money its all a

 

lol aint that the truth. If i would stop spending it all on the race car, i might have more of it.

But since my roomate is being a douchebag and moving out, leaving me to pay all the rent, money is once again tight.

Know anyone who wants to live in Arlington? lol

 

Dude... My roomies girl just left too so we all pay extra now

Damn whores

Love and hate em

Time to buy a lotto ticket

 

Love em? bah.

Love to do things TO them...yes. Love em? Nah

 

exactly well stated

 

Word. "Women trade sex for love, men trade love for sex...." muhah

Hi-jack... The Naches is pretty aggressive? I am running 30x9.50's.... open diffs.... I ought to toss a spool in the back of my rig. I am curious if i even dare to take it on.

 

Just do it

Damn Hi-jackers



Forget the spool just weld it Bring it on over and ill do it for ya if you dont got a welder

 

So have you pulled the old motor? BTW - thanks for comming out last weekend, everyone was really stoked to meet you & your buddies - even though your truck was being an ass monkey. I have been thinking about it it really sounded like you skipped a tooth on your timing belt. That or there's something wrong with your fuel pump - in which case the engine swap won't resolve the issue. Phil's old stunt bike didn't throw any codes, and when it did it was the wrong code. Turned out it was the timing belt. It did the same thing your turck is doing, it would run perfect for a little while, and out of no where it would bog out. Well if all else fails, I guess you could always buy a Sammi and wheel it like Hobbie.

 

ya that little Sami when everywere.

I pulled the motor last night. Took about 1hr. I checked the timing and did a few other tests but couldnt really find anything. Seemed to have a bad fual air ratio as I could control it some with covering the MAF. Ive pretty much had it trying to get it running the way I want. As for fuel pump ive got the MSD one I wanted sitting at home and I should have it in for the new motor as Ive wanted to fix that tank design anyway. Ive got a 4.3 in site that I may be getting in the next week or so I hope. The guys in Omak so its a drive thats for sure but its a good motor that Erics brothers friend has. The guy is out there right now may be coming over here next week so maybe ill see if he cant bring it with him I want it now cause that motor is way simpilar than the 3.4 and should be a very fast swap once I get the parts. Im gonna fab some new motor mounts, maybe tube clip the front a little and I would really like a cage. Lots of work but shouldnt be to bad I wish I didnt have to be at work right now otherwise ide be up there workin on the truck.

I just want to wheel

Like I said in the other post about taking my chevy out all I would need to do is weld the rear and it would be set

 

Schweet. Smerg a berg at work and they'll have to send you home with unemployment pay. Then you can get your Runner Running.

You made quite an impression on Scott and he said as soon as you're ready to buy a few sticks you're more than welcome to come out to his shop and we'll teach you how to bend some tube.

 

Ya thats awesome. Everyone out there this weekend was really chill and nice. I will be buying some tube shortly cause I definetly need a cage. Ill have to get his number and check out his shop.

I know he told me that he has 2" and 1.5" dyes. Eric said if we could borrow one he could machine one out to bend some 1.75" I think I want that size for my cage. You should ask him to borrow one or I could call him sometime and get one either way

 

Scott and Phil work together so if you text Phil he can ask Scott for you. I'm glad you liked everyone. I love 'em.

 

Were do they work??? Ill have to send Phil a text later today. Thanks!

 

They're on break right now and up at Ryan Capes' house. Give him a ring now if you have a second.

 

I would but I cant leave my comp. I can sneak onlne but if they catch me on the phone then they make me work again

Ill call him when I get a chance

 

Aww, you need to find a new place of business. Alright, back to work for me.