The passenger side rear window has apparently "slipped" out of the frame/track. It will power up if you pull up on it, but slides back down (open). What do I need to know to get the door panel off without destroying it and/or the clips? And what and how should I lube the mechanism when I get that far? Thanks in advance! psulkosky@aol.com

 

There is a discussion going on right now on www.ih8mud.com about this same thing, when you pull the door panel off there is a plastic sheeting to keep water out of the electronics that you basically have to ruin and replace to fix your window head over to that site for more info, Brad.