Anyone know who's 2nd gen 4Runner is pictured on the far right hand side of the Yotatech.com banner? I need a new rear bumper ASAP for my 4Runner to pass inspection and I like the looks of that bumper with the spare tire carrier.

 

Here ya go.
https://www.yotatech.com/forums/show...threadid=14745

 

I would be doink got that custom rear bumper at Kennesaw Mountain Accessories in Douglasville, GA.

Their website is: www.kenmtn.com/

Hope this helps!



Brian

 

Thanks guys,

I think I've got everything I need. Just sent a message to doink to hopefully get some pics and more info on the bumper.

 

I am about 3 hours from Douglasville, GA and am looking for a rear bumper myself. I also emailed doink to get some info but I also emailed Kyle at Kennesaw. He replied within about 15 minutes. Try that to dude!

I'm going to tool over there sometime in the next few weeks to check them out.

Hope this helps!



Brian

 

brian -

you need to get in touch with Andrew Hawkins, he has a 3rd gen rear bumper from them. he will answer all your questions.

FYI, he is NOT satisfied with the quality of his bumper.

 

How and where?



Brian

 

Take a quick drive out to www.rockware.net in Colorado Springs, CO. There were multiple Rockware bumpers at the CO4RJ and they all look excellent. There's no question they are the best rear bumper available. They even kick butt on Steve Schaefers home-built bumper (well, except for his superior license plate light). Adrian has one on his 2nd gen 4Runner and there's multiple 3rd gens with Rockware.

 

hey guys, not saying it's a bad bumper or anything like that b/c if i had the money i would look into it too, but i'm pretty good buds with doink and we when we've talked about his rear bumper he always tells me he wishes he never got it and spent the butt load of cash he paid for it one something else.don't know what to tell ya. IMO i like it.

 

hawkdog2121@yahoo.com

 

884runner,

I was checking out the rockware website and they have some good looking stuff. Also doink emailed me and said he wasn't all that happy with the quality of his bumper so at this point I'm going to contact rockware.

Bill

 

Do yourself a favor and avoid Kennesaw Mountain.

Then go to the CO4RJ pictures and look at my bumper.

Then go to the Springs and get one from Rockware. Don't bother asking them to build it and ship it as it is one big honker and would then become way more trouble than it is worth.

I flogged mine this weekend and most of the summer and all that happened was a little paint loss.

 

Flygtenstein,

Well that's a bummer b/c the Springs is quite a drive from Pennsylvania! What's the link to see the pictures of the CO4RJ?

 

hah, just saw this rig guys. yep, thats mine. my bumper was made by KMA. definatly not a fan. see my post here : https://www.yotatech.com/forums/show...threadid=15996

i would try my best not to do business with them again.

 

Anybody try these guys? Might be getting one for my 1st Gen...
http://www.rockymtnfab.com/