95.5-2004 Tacomas & 96-2002 4Runners 4th gen pickups and 3rd gen 4Runners

When does a 22r carb engine red-line?

Thread Tools
 
Search this Thread
 
Old Nov 5, 2004 | 12:05 PM
  #1  
brendonv's Avatar
Thread Starter
Registered User
 
Joined: Jun 2004
Posts: 199
Likes: 0
When does a 22r carb engine red-line?

What is the first point of red-lining for the RPM's on a 22r carburated engine?
Reply
Old Nov 5, 2004 | 03:01 PM
  #2  
kyle_22r's Avatar
Registered User
 
Joined: Mar 2003
Posts: 3,981
Likes: 4
From: Lacey, WA
i'd say on a stock engine your power starts to drop at around 5000RPM.

when i get my new engine built with a crawler cam, probably even lower.
Reply
Old Nov 5, 2004 | 03:17 PM
  #3  
brendonv's Avatar
Thread Starter
Registered User
 
Joined: Jun 2004
Posts: 199
Likes: 0
damn, i usually shift at 3,000 RPM because i thought it seemed like the R's were up and today i went to like 3500 to test, i would of never thought i could go even more, what do u think is normal like shifting up hills or something....4,000??
Reply
Old Nov 5, 2004 | 04:22 PM
  #4  
Greg_Canada's Avatar
Registered User
 
Joined: Jul 2004
Posts: 1,231
Likes: 1
From: Toronto
5750 redline.
I shift my 3.slow from anywhere between 3000-5000, different motor tho.
i wouldn't go above 4000 unless it's freshly rebuilt...
Reply
Old Nov 5, 2004 | 05:20 PM
  #5  
Flamedx4's Avatar
Registered User
 
Joined: May 2004
Posts: 3,291
Likes: 0
From: 100 miles offshore as much as possible, & Springfield Oregon USA
My 22re was bone stock except a K&N drop-in. I revved it to 4000 all the time when pulling up the dunes or going for max speed for passing etc. (I used to actually watch the tack and keep it at 4000, no more no less...) I felt there was no more power to be had above that - it just didn't "pull" above 4 grand anyway. But 5750 is the redline and was therefore "safe" when new. On an older motor I wouldn't do it. No reason to do that anyhow though. But you always shifted at 3 grand you've never felt how capable that little engine really is!

If you didn't have a tach, a good rule of thumb for how high to rev is either when the engine sounds no longer sound good but rather get kind of "ratty" sounding - NOT valve float - if you rev it that high you will hurt something! It just doesn't sound sweet above a certain speed so don't rev it up there. The other way is when it doesn't willingly keep revving and pulling any higher. No need to rev any higher if the power has quit building, now is there? This point will nearly always be well below the actual redline, except of fast revving car motors (or motorcycle motors.) On an MR2 or a Kawasaki, for instance, it feels SWEET right up to redline. Different animal.

Last edited by Flamedx4; Nov 5, 2004 at 05:27 PM.
Reply
Old Nov 6, 2004 | 04:04 AM
  #6  
brendonv's Avatar
Thread Starter
Registered User
 
Joined: Jun 2004
Posts: 199
Likes: 0
thanks alot!
Reply
Old Jan 19, 2009 | 12:09 PM
  #7  
soml13's Avatar
Registered User
 
Joined: Jul 2008
Posts: 15
Likes: 0
yea thats helps me 2 i dont know how high to push my um i'd choke if u called it a monster so its my gutles wonder lol.....not my bike on the other hand has power all the way up to 11thousand but i have a tach so im willing to push that one plus i just rebuilt the whole thing...ha ha ha 28 year old sport cafe racer and she still smokes the young gun bikes ha ha ha
Reply
Old Jan 19, 2009 | 02:16 PM
  #8  
Adam F's Avatar
Registered User
 
Joined: May 2002
Posts: 2,479
Likes: 2
From: Cincinnati Ohio
Say what?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
kazuya2416
86-95 Trucks & 4Runners
7
Apr 5, 2024 02:17 AM
sandyota
84-85 Trucks & 4Runners
18
Feb 4, 2021 11:16 AM
Yota.Jay
86-95 Trucks & 4Runners
3
Jul 23, 2015 08:08 PM
cars-guy
Pre 84 Trucks
1
Jul 11, 2015 07:51 PM
Tyler Cunningham
86-95 Trucks & 4Runners
3
Jul 11, 2015 10:18 AM




All times are GMT -8. The time now is 10:05 AM.