Is this a good price for a rear axle?
02-14-2005, 05:22 AM
#1
Contributing Member
Thread Starter
Join Date: Jul 2002
Location: SLC, UT
Posts: 5,862
Likes: 0
Received 0 Likes
on
0 Posts
Is this a good price for a rear axle?
I went to a local junk yard and found a 97 Limited 4Runner with a rear locker. I asked the guy how much it would be for the complete axle and E-locker wiring/ecu, and he said $500.
Is this too expensive? The only other concern is that it looked like the arms were bent, so I am not sure if there is damage to the axle housing.
Is this too expensive? The only other concern is that it looked like the arms were bent, so I am not sure if there is damage to the axle housing.
02-14-2005, 06:46 AM
#2
Sounds like a pretty good deal to me. That include the axle housing, axles, 3rd with e-locker, brakes, ecu, and wiring? 4.10 or 4.30 gears? It will need to match your front unless you are going to regear. Mileage? What did the 4Runner look like that it came out of?
02-14-2005, 07:16 AM
#3
Contributing Member
Thread Starter
Join Date: Jul 2002
Location: SLC, UT
Posts: 5,862
Likes: 0
Received 0 Likes
on
0 Posts
It includes everything.
I didn't check the axle ratio, I need to find that out as well as find out what mine has..
The 4Runner was rolled. The engine and tranny is gone. And the seats were not in there either.
I didn't check the axle ratio, I need to find that out as well as find out what mine has..
The 4Runner was rolled. The engine and tranny is gone. And the seats were not in there either.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
WTB[WestCanada]: 1989 4runner stock front bumper and other items
lledwod
Items Wanted
1
08-30-2016 01:03 PM
Jnkml
95.5-2004 Tacomas & 96-2002 4Runners
3
07-06-2015 01:20 PM
Vargntucson
95.5-2004 Tacomas & 96-2002 4Runners
0
07-04-2015 12:15 PM
