No pics yet but this is what i have.

HU- Stock
Door Speakers- Stock
Amp- Kenwood 1000 watt
Sub- 12" Kicker L7

 

Hey, What type of RF Punch are those?? HE, HX2?

 

CHEA!!! Feels great when you build your own box!!! What kind of insulation did you get at Lowes??

 

HX2...
Wired to go down to 1 ohm so I get ~250 extra watts per sub(750 each) with the amp.

All of it is just sitting around and that RF amp never even saw power yet.

 

i forgot what the guy told me it was but when i walked in and he asked me what i needed and i told him what i had built and i needed to insulate it and he gave me something and said that would be the best because it keeps the noise in and stops a lot of the rattling. But now my left side passenger window isn't working but i am to lazy to open it up and see what happened.

 

So I took the subs out of the camry to dust off and carpet the box. Though you guys would like some bass pr0n...







Wish I could mount them like this...






Put them in the runner just for S&Gs. Box doesnt fit between the fender wells. It is about 40" wide I beleive. But I think it looks awesome there...




Back in the Camry...

 

Chea, I have the 15s hx2... LOOOOOVE them!!! I am using 1 t1000 for now and have them wired at 2 ohms until I can get another amp... Still loud as hell tho!!! I remember the 1st system I had was 2 15" punch series subs, 2 500 watts punch amps, 2 8" punch subs... It all was sitting in my CLOSET because I didn't have a vehicle!!! Ended up selling it all for a down payment on a 1994 chevy s10 and ended up getting in a wreck i think 1 week later...

 

just bought a 12" kenwood 1200w sub, kenwood amp, and a down firing ported box made to fit the 4runner.

 

You guys are taking the utility out of SUV. Ah well, I'd like to put a small box back there. Nothing big. Has anyone noticed that the stock HU sounds great through radio but sucks playing CD's?

 

Well at least I still have some ___lity. Besides They take room in any car so this leaves us with the most room left over.

 

I have a pioneer deck, 6.5" jl in all my doors, 300x2 jl for a 10" pioneer premier sub, 400x4 rockford for the door speakers. my deck just plays music, it doesn't put out music yet........where can I add 4 more speakes without losing more space?

 

CHEA... Just call mine a SPORT VEHICLE!!! LMAO!!!!!!
Hope every 1 is doin good!!
I didn't get the chance to listen to the stock radio... As soon as I got it to the apt, I had replaced it with a kenwood head unit...

 

here's the subs i had in my wagon in high school. the box didnt fit in the runner as well as it did in the wagon (scrap wood blocks)

 

I have a Rockford fosgate mono amplifier which uses 60 amps.
I plan to install a 2 channel amp to power my rear speakers, im only have the stock alternator. is it possible to add another 60 amp amplifier without any effects like flashing headlights, stalling or any other harm.

 

this thread is still survive!?! wow I have completely forgotten about this.

I put my system in my honda crx a while ago. I don't like the bass responses inside of the crx. I thought it was gonna be louder in my crx cause of smaller cabin but boy I was wrong! It sounds much louder in the 4Runner.

 

nice.

not to sound like a n00b, but why is polyester stuffing sometimes used in sub enclosures?

I run a mono Audiobahn 8000T 1600w amp, hooked up to a 12" JL Audio 4Ω sub and a 12" Rockford Fosgate Punch P2 series 2Ω sub, wired in parallel. While its not completely ridiculous, it sounds amazing and can be decently obnoxious when need be.

and to the guy with the four 15's, nice work bro

 

You will be fine. And that would be 60 watts not amps. You dont need to worry about the alternator till about 3000watts or 1200-1300rms watts. There are other things you can do like adding a capacitor or doing the big 3 mod. Though I doubt you would need either of those.

If you happen to dim at all do the big 3 mod first it willmost likley solve the problem.


The stuffing is for sealed boxes. It slows down the moving air in the box and makes the sub "think" its in a slightly larger box.

 

THANKS.... I have to sooo put some pics up from my phone!!! I had to glue my mirror up 4 times to my window!!! Well, the 4th time I used the dual epoxy and wouldn't you know it... The DAMN THING FELL OFF AGAIN!! But sumthing changed this time around. The epoxy held and took out a chunk of the GLASS WITH IT!!! I damn near pissed myself!!! First time that ever happenened to me!!!

 

nice. so since I have a sealed box, I could stuff it per say and get a little more bass/fuller sound?

by the way, including a pioneer head unit, all wires and connections, the two original subs, the rockford fosgate, amp, and box, I have a grand total of $270 bucks in my system... can't be that...

 

I would say you might notice a small difference. Wheather its worth it is debateable but it is cheap and easy to try. My mom has a bunch of sewing/girly-crafting-crap laying around and I took some quilt stuffing and ripped it apart for mine. It was free, but I've never heard my system without it so I can't tell you if it was worth the effort. lol

Ive got about 200 in my 82's system. Kenwood HU, POS front and rear speakers. POS amp. POS free subs. POS wood for box. And I'll tell you what, it sounds like a POS system HAHA! But much better than the 2 4''s from the factory. I can hear it fine with both windows down at 70 with no distortion. Good enough for a POS truck.