irab88's 1993 PickUp Build-Up Thread
Feb 27, 2012 | 06:50 AM
#1482
Registered User
Joined: Aug 2009
Posts: 13,574
Likes: 71
From: Wilkes-Barre, PA, USA
Currently no, I'm too lazy to fix my other mount for the second antenna for the stereo, it worked pretty good, but technically it's not supposed to. Not sure how well it works over the OEM antenna as my OEM antenna was kinda fubarred right from the get go. lol.
Feb 27, 2012 | 06:51 AM
#1483
Yeah if that's the same one on your bumper, looks like someone put an FGT-4 into a FLEX-4 package. That even appears to be too thick. Besides the wire isn't wound like that on the FLEX antenna either. As you can see in the video and this below photo, that you an barely see the wire wrap and is almost smooth.
FYI An FGT antenna is a standard 3/8" diameter whereas the FLEX are 1/4" diameter.
FYI An FGT antenna is a standard 3/8" diameter whereas the FLEX are 1/4" diameter.
this is the first time ebay has let me down
Feb 28, 2012 | 10:05 AM
#1484
he's sending me a return label and (supposedly) a flex-4. i'll be waiting to see if it's the same thing or an actual flex antenna...
other note, i had ordered a cell-phone holder, so i could use the gps in the truck. it turned out to be too narrow, and they sent me another. it was the same width, i took pictures and sent those, along with a "i'm done ordering and waiting" message. so now i have 2 holders. i'm going to try to make 1 into a camera mount, and the other, don't know yet.
other note, i had ordered a cell-phone holder, so i could use the gps in the truck. it turned out to be too narrow, and they sent me another. it was the same width, i took pictures and sent those, along with a "i'm done ordering and waiting" message. so now i have 2 holders. i'm going to try to make 1 into a camera mount, and the other, don't know yet.
Mar 1, 2012 | 03:52 PM
#1491
Originally Posted by Swimmerboy2112
b-b-b-butttt, howwww?
Originally Posted by Swimmerboy2112
You bought that from Glen Mills didn't you!!!
Philly Craigslist!!!!
Philly Craigslist!!!!
spokane. 67lbs shipped. dam that thing is heavy
Mar 1, 2012 | 04:01 PM
#1492
Wow super find, I want one
Mar 2, 2012 | 07:12 AM
#1500
i'm trying to sell the arb. it would cost too much time and effort to pull the ifs third, gear it, route a line, and get oba somehow. i was planning on a co2 setup similar to paintball, but was having a hard time finding info.
the e-locker is already geared, already broke-in, and ready to get shoved in the axle. modification isn't going to be too hard. i have a welder at home, and several new grinding wheels. lock and load.
the e-locker is already geared, already broke-in, and ready to get shoved in the axle. modification isn't going to be too hard. i have a welder at home, and several new grinding wheels. lock and load.
