So I got my swap done and love it 21mpg and can cruise around in 5th up and down these hills. My ? Is my tach don't work at all. I haven't done the resistor mod. Because I though it would work but read high. It will blip when you turn the key.

 

So do the tach mod and it'll work. Maybe I missed the question?

 

LOL. Yup

 

Aye you gotta do the tach mod. It's simple to do and cheap.

 

Ok so I took my cluster out and it does not look like the pics that I can find the 2 on 4x4 . I have a bright blue back on mine. 88 sr5 4runner it looks like the one at mind spring.com

 

Did you remove the clear top shell and remove the three screws holding the tach in the cluster. Once the tach is removed you will notice the board on the back of the tach where the resistor goes. Be careful not to remove the needle as I did and the tach didn't work accurately after

 

what he said ^^^

 

Look at this post. Followed it to the T and my tach on my 88 SR5 works perfectly.

https://www.yotatech.com/forums/f160...l#post51535189

10k , 1/4 watt resistor will do the trick.