Solid Axle Swaps, All Years Anything SAS related

frame to ground height with sas kit.

Old Nov 24, 2007 | 11:16 PM
  #1  
weakyota91's Avatar
Thread Starter
Registered User
 
Joined: Dec 2005
Posts: 346
Likes: 0
From: Redding C.A.
frame to ground height with sas kit.

I was curious what your frame to ground height is with 4 inch sas lift and 33s
If i could get a couple measurements that would be really helpful in helping me decide wether i want to go with 4 or 5 inch leafs. Let me know what kit you have and tire size you are running thanks guys. I really leaning toward the 4 inch springs when i do my swap. Rite now i have 63 chevys in the rear (no block) ifs 4 inch trail disaster in front and the rear probly sit a good 2 inches higher in rear.
Reply
Old Nov 25, 2007 | 01:15 AM
  #2  
blazerboy72's Avatar
Registered User
 
Joined: Feb 2007
Posts: 193
Likes: 0
I have 4" front and 5" rear with 38.5's mine measures 30" to the bottom of the frame.
Reply
Old Nov 25, 2007 | 05:50 AM
  #3  
waskillywabbit's Avatar
Banned
iTrader: (-1)
 
Joined: Jul 2003
Posts: 3
Likes: 20
85 4Runner w/ 5" springs on 40s and I sit at 26" to the frame under the driver's seat

I went with the 4" leaf springs on my 85 ext cab (in process now) to clear 35s and keep the sheet metal.

With an extended cab, I would suggest the 4" springs front and rear.

SAS lift kits:
http://www.wabfab.org/products/suspension/saskit.htm

Classic rear lift kits:
http://www.wabfab.org/products/suspe...earliftkit.htm

Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Flying91
86-95 Trucks & 4Runners (Build-Up Section)
45
Apr 11, 2024 04:39 PM
4x4-runner
Vehicles - Parting Out
1
Aug 30, 2015 08:55 AM
Shagool22
Offroad Tech
1
Aug 14, 2015 12:24 AM
4x4-runner
Misc Stuff (Vehicle Related)
0
Aug 2, 2015 09:24 AM
yourrealdad
95.5-2004 Tacomas & 96-2002 4Runners
2
Jul 21, 2015 11:13 AM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 08:22 AM.