What is your mod wish list?
#1
What is your mod wish list?
I've only been a member at Yotatech for a short time but it's been a lot of fun being back with the Toyota 4x4 crowd. My first vehicle (I bought it when I was 15-before I could even drive it) was a 1977 FJ-40. Not only was it a great four wheeling vehicle it was the only one in my high school parking lot. I ended up having to sell it because the rust, mechanical issues, etc...were more than my pockets could bear. Now I'm back with my 1991 22RE Pickup and finding myself trolling the aftermarket parts sites again and lusting after various mods for my truck. Four wheeling really isn't the purpose anymore-firewood gathering and hauling and hunting is, but usually there's some mud involved in that too Anyway, I thought it would be interesting to list all of the mods on your "wish list"-what you plan to do to your truck or wish you could do. I'll start:
ZUK mod with 12" 150lb springs
Hellwig helper springs
30/9.50/15 MTs (probably Treadwrights)
15" Jegs D-window wheels
Rear tube bumper/receiver hitch
Front receiver hitch (for a winch or cargo carrier)
Winch
T100 brakes
Supra AFM
Headache rack
Auxillary lights
4:88 gears/limited slip
Bucket seats
ZUK mod with 12" 150lb springs
Hellwig helper springs
30/9.50/15 MTs (probably Treadwrights)
15" Jegs D-window wheels
Rear tube bumper/receiver hitch
Front receiver hitch (for a winch or cargo carrier)
Winch
T100 brakes
Supra AFM
Headache rack
Auxillary lights
4:88 gears/limited slip
Bucket seats
#2
Registered User
iTrader: (2)
Oh my list is too long to post lol but it goes something like this
-SAS (in the works)
-Custom rear bumper/tire carrier (in the works)
-35" KM2's
-Fender flares
-7MGTE swap (yeah that ones most likely a pipe dream)
-Rebuild 22RE (more than likely)
-4.88's
-Dual T-Cases
-Aussie locker
-Rear disc swap
-etc...
-SAS (in the works)
-Custom rear bumper/tire carrier (in the works)
-35" KM2's
-Fender flares
-7MGTE swap (yeah that ones most likely a pipe dream)
-Rebuild 22RE (more than likely)
-4.88's
-Dual T-Cases
-Aussie locker
-Rear disc swap
-etc...
#3
Registered User
In the short term (while still in college):
redo rear interior(happening now)
fab front bumper
33x12.5 Dura-tracs
hi-clearance fenders
5.29s
misc. other small goodies I won't mention
Long term(hopefully it'll happen someday):
-1.9l VW TDI swap
-dual cases
-full-fiberglass and a real paintjob to replace the backyard one
-rework the IFS; low-pro. bumpstops(for uptravel), BJ spacers on relaxed t-bars(for droop), IFS brace, Total Chaos centerlink and arms, heim endlinks.
-ARB rear locker
Lots more...
redo rear interior(happening now)
fab front bumper
33x12.5 Dura-tracs
hi-clearance fenders
5.29s
misc. other small goodies I won't mention
Long term(hopefully it'll happen someday):
-1.9l VW TDI swap
-dual cases
-full-fiberglass and a real paintjob to replace the backyard one
-rework the IFS; low-pro. bumpstops(for uptravel), BJ spacers on relaxed t-bars(for droop), IFS brace, Total Chaos centerlink and arms, heim endlinks.
-ARB rear locker
Lots more...
#4
Registered User
iTrader: (2)
Join Date: Dec 2009
Location: Pleasanton, CA - SF Bay Area
Posts: 2,159
Likes: 0
Received 7 Likes
on
5 Posts
63" chevies (in the garage with new welder)
custom swing out tire carrier and bumper
82 Supra AFM and battery swap
Custom center console to replace mine plastic one that died.....
custom swing out tire carrier and bumper
82 Supra AFM and battery swap
Custom center console to replace mine plastic one that died.....
#5
Contributing Member
Join Date: Sep 2006
Location: Tacoma
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
Custom upper control arms with longer shocks
Alcan rear springs
can-back
Trail armor: sliders, rear bumper, winch bumper
ARBs front and rear
budbuilt high clearance crossmember
TRD supercharger with full URD mods
I'm sure there's more...there's always more!
Alcan rear springs
can-back
Trail armor: sliders, rear bumper, winch bumper
ARBs front and rear
budbuilt high clearance crossmember
TRD supercharger with full URD mods
I'm sure there's more...there's always more!
#7
Registered User
Finish install of poly bushings,
finalize wiring for electric fan,
Install cb
Install the manual hubs
Repair leaking rear diff
SOMETIME NEXT YEAR:
new front bumper
Locker
OBA
33-12.50-15 Yokahama Geolander MT's
Paint
Window tint
mud
finalize wiring for electric fan,
Install cb
Install the manual hubs
Repair leaking rear diff
SOMETIME NEXT YEAR:
new front bumper
Locker
OBA
33-12.50-15 Yokahama Geolander MT's
Paint
Window tint
mud
Trending Topics
#8
Registered User
I don't do any offroading, but I have a few odd mods that I plan to do someday:
5vze swap (already got the motor, transmission and various other parts)
-make tire swing/back bumper, to get spare tire out from under the back
-duplicate that under the bed storage box one guy made, with lockable latch
-add dual batteries, isolator.
-put in a 12v compressor with enough umph to run air tools (expensive) plus air tank
-put in a hose reel (in the under compartment) for air hose to air tools/tires
-Put in a nice inverter run mainly off the second battery.
-put in a hose reel (in under compartment) for extension cord from the inverter.
-build front bumper, similar to smittybilt style, with reciever hitch in it.
-put winch in reciever hitch, to be able to switch between front and back receiver, and to whomever needs to borrow it.
-key pad instead of key for the ignition switch (type in code and then press start)
-----backup key ignition remains in place
-keyless entry with trunk release wired to toggle rear window.
-hidden killswitch
and a few other things I cannot remember at the moment.
5vze swap (already got the motor, transmission and various other parts)
-make tire swing/back bumper, to get spare tire out from under the back
-duplicate that under the bed storage box one guy made, with lockable latch
-add dual batteries, isolator.
-put in a 12v compressor with enough umph to run air tools (expensive) plus air tank
-put in a hose reel (in the under compartment) for air hose to air tools/tires
-Put in a nice inverter run mainly off the second battery.
-put in a hose reel (in under compartment) for extension cord from the inverter.
-build front bumper, similar to smittybilt style, with reciever hitch in it.
-put winch in reciever hitch, to be able to switch between front and back receiver, and to whomever needs to borrow it.
-key pad instead of key for the ignition switch (type in code and then press start)
-----backup key ignition remains in place
-keyless entry with trunk release wired to toggle rear window.
-hidden killswitch
and a few other things I cannot remember at the moment.
#9
Registered User
iTrader: (1)
Join Date: Apr 2011
Location: Kingston Springs, TN
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
22rte build (in progress)
hitch reciever
paint job (british racing green)
zuk mod
cadillac compressor mod
lockers
3'' lift (already have it, just have to take time to put it on)
v6 brake swap
traction bar and new suspension (OME more than likely)
hitch reciever
paint job (british racing green)
zuk mod
cadillac compressor mod
lockers
3'' lift (already have it, just have to take time to put it on)
v6 brake swap
traction bar and new suspension (OME more than likely)
#13
Registered User
1) low low SAS
2) 35" tires
3) 5.29s and E-lockers
4) roof rack
5) tubed quarter panel / cab protection
6) cargo area drawer system
7) electrical overall ( dual batteries, higher output alternator, fuse block )
It just does on....
2) 35" tires
3) 5.29s and E-lockers
4) roof rack
5) tubed quarter panel / cab protection
6) cargo area drawer system
7) electrical overall ( dual batteries, higher output alternator, fuse block )
It just does on....
#15
Registered User
Join Date: Aug 2011
Location: vancouver wash right now and creswell or
Posts: 643
Likes: 0
Received 1 Like
on
1 Post
hmm i only have a few cause i belive its almost done msd or some sort of ignition and coil and fuel regulator so i can actually wheel maybe a rear locker and performance distributor and snorkel then eventually some 36 bogs narrow as i can get them might have to go 35 10.5
#16
Registered User
iTrader: (5)
1. A NICE DECK, finally, ...... eventually! hahaha.
2. Sliders
3. Trunk Area Switch for "ANYTIME" rear window roll down mod(4Crawler I believe? lol)
4. Trunk Area semi-fixed 750W inverter(already have everything but the time! lol)
5. The last one is so future and for a donor rig... so I'll include them both in one.... 1UZ and SAS
2. Sliders
3. Trunk Area Switch for "ANYTIME" rear window roll down mod(4Crawler I believe? lol)
4. Trunk Area semi-fixed 750W inverter(already have everything but the time! lol)
5. The last one is so future and for a donor rig... so I'll include them both in one.... 1UZ and SAS
Last edited by ChefYota4x4; 11-10-2011 at 09:53 AM.
#17
Registered User
iTrader: (1)
Clean out the garage and get rid of all the junk.
No more projects Just finish the ones that are started should be enough to see me for the next 10 years . 3 rear bumpers to build.
One 7MGTE Swap to finish up.
one 22rec to rebuild
2 4x4 pick ups to strip and scrap one 88 4x4 to put together from all the stripped parts
Finish the Celiamino project
Sell the 83 4x4 pick up
I am sure there are many more I forgot about.
Oh yea change the oil.
No more projects Just finish the ones that are started should be enough to see me for the next 10 years . 3 rear bumpers to build.
One 7MGTE Swap to finish up.
one 22rec to rebuild
2 4x4 pick ups to strip and scrap one 88 4x4 to put together from all the stripped parts
Finish the Celiamino project
Sell the 83 4x4 pick up
I am sure there are many more I forgot about.
Oh yea change the oil.
#20
Registered User
fab sliders
fab front bumper
fab rear bumper
warn mx800 winch
fix the rust issues on the bed
paint
safari snorkel
rhino line bed and quarters
bushwacker fender flares
lc engineering header
weber
4in lift
33s
fab front bumper
fab rear bumper
warn mx800 winch
fix the rust issues on the bed
paint
safari snorkel
rhino line bed and quarters
bushwacker fender flares
lc engineering header
weber
4in lift
33s
Thread
Thread Starter
Forum
Replies
Last Post
voiddweller
86-95 Trucks & 4Runners (Build-Up Section)
53
02-01-2016 05:46 AM
FS[PacNorWest]: 1987 4Runner SAS, 22RE, 5Spd, Dual Cases, etc
toyotasaurus
Vehicles - Trailers (Complete)
0
09-24-2015 03:30 PM