Newbie Tech Section Often asked technical questions can be asked here
Sponsored by:
Sponsored by: CARiD

oil in radiator

Old Dec 4, 2006 | 06:55 AM
  #1  
daveo's Avatar
Thread Starter
Registered User
 
Joined: Dec 2006
Posts: 19
Likes: 0
oil in radiator

hi i am a newbie. i have a 95 4runner sr5 4wd a/t. i have oil in my radiator. i read some threads and i think it is a head gasket. i checked with toyota and my vin is not on the recall list so i am s.o.l. i do not however have water in my oil or tranny fluid. could it possibly be something else (hopefull but doubtful).. also if i drain the oily rad. fluid and put new rad. fluid in will it then get into the engine? any help of ideas would be great. thanks.
Reply
Old Dec 4, 2006 | 07:01 AM
  #2  
SteelHound's Avatar
Registered User
 
Joined: Oct 2006
Posts: 39
Likes: 0
From: Youngstown, OH
Does the Engine oil look milky?
Reply
Old Dec 4, 2006 | 07:03 AM
  #3  
daveo's Avatar
Thread Starter
Registered User
 
Joined: Dec 2006
Posts: 19
Likes: 0
no it always looks normal.
Reply
Old Dec 4, 2006 | 07:05 AM
  #4  
kmcc78240's Avatar
Contributing Member
 
Joined: Mar 2006
Posts: 1,775
Likes: 0
From: San Antonio, TX
More then likely yes HG blew. The coolant can go into oil or oil can go into the coolant. Mine blew at 154K, pin hole leak into one of the cylinders. Have you over heated?
Reply
Old Dec 4, 2006 | 07:08 AM
  #5  
daveo's Avatar
Thread Starter
Registered User
 
Joined: Dec 2006
Posts: 19
Likes: 0
i would never know the temp guage never goes above the half way point but sometimes the engine does hint that it is overheating ie valve chatter at 55 or 60mph and that hot hot engine smell when i get out of the truck. also my oil pressure guage has never gotten above the halfway point.
Reply
Old Dec 4, 2006 | 07:12 AM
  #6  
daveo's Avatar
Thread Starter
Registered User
 
Joined: Dec 2006
Posts: 19
Likes: 0
i think it is the head gasket. i think i have always known it but been in denial. i have a mechanic at the stealership that has been reliable so far and does side work. it is just getting the miney together to do it
Reply
Old Dec 4, 2006 | 07:19 AM
  #7  
daveo's Avatar
Thread Starter
Registered User
 
Joined: Dec 2006
Posts: 19
Likes: 0
thanks for your replies. have a good day!
Reply
Old Dec 4, 2006 | 07:22 AM
  #8  
kmcc78240's Avatar
Contributing Member
 
Joined: Mar 2006
Posts: 1,775
Likes: 0
From: San Antonio, TX
I understand the denial part, but you will feel better after it is done. good luck, lots of good info on here. Which I would have known about YT before my HG blew. Welcome by the way
Reply
Old Dec 4, 2006 | 07:26 AM
  #9  
daveo's Avatar
Thread Starter
Registered User
 
Joined: Dec 2006
Posts: 19
Likes: 0
thanks kmcc. yeah i know i will feel better once it is done, but it is just "getting to the getting it done" part that is painful but i am patient. thanks again!

Last edited by daveo; Dec 4, 2006 at 07:28 AM.
Reply
Old Dec 4, 2006 | 07:29 AM
  #10  
daveo's Avatar
Thread Starter
Registered User
 
Joined: Dec 2006
Posts: 19
Likes: 0
oh one other question, when i buy the parts to fix the HG where should i get them from, NAPA or stealership?
Reply
Old Dec 4, 2006 | 08:15 AM
  #11  
kmcc78240's Avatar
Contributing Member
 
Joined: Mar 2006
Posts: 1,775
Likes: 0
From: San Antonio, TX
check out engine builder, at www.engnbldr.com, Very good stuff comes with everything.
wherei s alink to bumpin yotas thread
https://www.yotatech.com/forums/show...t=engnbldr.com
Reply
Old Dec 4, 2006 | 08:17 AM
  #12  
daveo's Avatar
Thread Starter
Registered User
 
Joined: Dec 2006
Posts: 19
Likes: 0
thanks i'll check it out!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
the1998sr5
95.5-2004 Tacomas & 96-2002 4Runners
15
Jul 14, 2020 08:35 PM
jasonty
Pre 84 Trucks (Build-Up Section)
41
Dec 23, 2018 01:00 PM
Jeffreynmandy
86-95 Trucks & 4Runners
21
Jul 18, 2015 08:26 AM
the1998sr5
95.5-2004 Tacomas & 96-2002 4Runners
6
Jul 16, 2015 06:20 AM
horunner1x
86-95 Trucks & 4Runners
10
Jul 10, 2015 06:33 AM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 04:30 AM.