torsion bars
Jun 10, 2018 | 01:03 PM
#1
Thread Starter
Registered User
Joined: Jun 2018
Posts: 1
Likes: 0
torsion bars
i replaced my upper a arms and now my torsion bar is rubbing on the floorboard on the passenger side , could it have gotten bent somehow ? could i have over torqued it. i just cant see whats going on does anyone have any feedback
Last edited by toymike; Jun 10, 2018 at 01:16 PM.
Jun 10, 2018 | 06:05 PM
#2
Registered User
Joined: Jun 2017
Posts: 2,436
Likes: 965
From: 02176
No, more likely you have the adjuster in the wrong position. Iirc, the splines on the front of the bar are keyed and can only go into the yoke on the control arm in one position but the rear adjuster part can go on the splines in any position. On stock bars there are paint marks to help you align them. That’s all I remember from swapping mine last year. Others can probably explain it better.
Thread
Thread Starter
Forum
Replies
Last Post
RAD4Runner
86-95 Trucks & 4Runners
23
Oct 20, 2017 05:17 PM
captainslow
86-95 Trucks & 4Runners
2
Aug 11, 2017 06:52 PM
