Borske

I am trying to remove the throttle body from a 22RE so that I may change the throttle response sensor.
I've remove the 3 bolts and 1 nut but the throttle body is "seized" in place. I tried tapping it with a rubber mallet but that didn't help.
I am hoping someone has a little trick that may help me out.
I've included a photo.

Jimkola

nothing else secures it to the plenum. Try tapping a bit harder on the side furthest away from the stud

Borske

Thanks! I put a block of wood on the side and gave it a couple of good taps and it finally let go.