Spinnbait

I have a 4" trailmaster suspension lift which actually gives me 4" on the front and 3" on the rear. This is great for the domestic, street queen guys, but I want the rear end up and some articulation. Please post pictures of your runners with OME 860 rear coils. I am looking for about 5". Like always, thanks guys.

95RunnerSR5

you could always order two longside LC coils from the dealer for ~$130 a pair and use spacers if thats not enough..

Spinnbait

I'm just not a spacer kinda guy. In addition, if a $160 set from OME will accomplish the same or better than $130 long sides and $100 spacers I will kill both the spacer and financial birds. Thank you for your help.

Spinnbait

I just ordered some OME 862's. Tehy are supposed to net 3/4" over stock on an 80 series cruiser. I'm hoping for just under 5" on my 4runner. I'll post results.

Spinnbait

I have my OME 862's installed. They gave me about 1 1/4-1/2" over my 3" trailmasters. They are rated to give a 80 series cruiser 3/4" lift. I just took them on a ~600 mile round trip and they ride great. Here are the pics, sorry for the lack of measuring device.

prior.


post.

slosurfer

looks good! what is your measurement from top of your rim to the fender?

Spinnbait

Measurements from wheel lip to fender are 17" passenger's side and 17 1/8" driver's side.

yotasavg

nice! i think these are the coils i might be looking for!