revise post....OME 860 pictures needed.
 

I have a 4" trailmaster suspension lift which actually gives me 4" on the front and 3" on the rear. This is great for the domestic, street queen guys, but I want the rear end up and some articulation. Please post pictures of your runners with OME 860 rear coils. I am looking for about 5". Like always, thanks guys.

you could always order two longside LC coils from the dealer for ~$130 a pair and use spacers if thats not enough..

spacers
 

I'm just not a spacer kinda guy. In addition, if a $160 set from OME will accomplish the same or better than $130 long sides and $100 spacers I will kill both the spacer and financial birds. Thank you for your help.

coils
 

I just ordered some OME 862's. Tehy are supposed to net 3/4" over stock on an 80 series cruiser. I'm hoping for just under 5" on my 4runner. I'll post results.

here they are
 

I have my OME 862's installed. They gave me about 1 1/4-1/2" over my 3" trailmasters. They are rated to give a 80 series cruiser 3/4" lift. I just took them on a ~600 mile round trip and they ride great. Here are the pics, sorry for the lack of measuring device.

prior.
http://i120.photobucket.com/albums/o...t/DSC_0619.jpg

post.
http://i120.photobucket.com/albums/o...t/DSC_0622.jpg

looks good! what is your measurement from top of your rim to the fender?

Measurements from wheel lip to fender are 17" passenger's side and 17 1/8" driver's side.

nice! i think these are the coils i might be looking for!