In my 90 Runner the rear window only works if i push the button up and down over and over and when i hear it go down hold down. That usualy seems to work more often on super hot days. Could the track be all goo'd up or what else would it be? When I push up and down the power on the guage goes back and fourth.

. Or could it be becuase the rear windshield whiper was pulled down and is broken. [but i have it stuck in the up position where it should be when its off] Anyway to bypass the safety for the rear winwdow? or any suggestions. Sorry I just asked a million questions in one but any help would be great...

 

This page should answer some of your questions:

http://www.4crawler.com/4x4/CheapTri...arWindow.shtml

 

I It works whenever it feels like it though its odd....

Is there anyway to just bypass all the relays and junk and just straight up have a switch going to the motor for up and down?.....

 

If you actually read my page, you'll find this section on that very topic:

http://www.4crawler.com/4x4/CheapTri...layReplacement

 

:pat: I looked at that too but didnt realize what it was